CAPS Update

Due to significant complications with our previous manufacturer, we’ve made the tough decision to change our approach for the CAPS project. It is unfortunate, having invested so much time, energy, and costs into the original tooling, but we see no other way to move forward without re-doing what has already been done.

After numerous rounds of revisions, we concluded that the quality, particularly the consistency of the legends, did not meet the standards our customers are used to. While this was a challenging decision, we are optimistic about our new direction and confident in the improvements we are implementing.

Good news is, to get things back on track and to meet our requirements, we have established a new manufacturing partnership. This collaboration has been underway for several weeks now, and production is progressing well. The new manufacturer has a great track record of producing double-shot keycaps. They employ a different method that utilizes a larger number of smaller molds. Some of the CAPS molds are already complete.

We are fully committed to delivering these long-awaited CAPS sets to you as soon as they are ready.

Wilba Tech x RAMA WORKS® Statement

RAMA WORKS and Wilba Tech have reached a positive agreement regarding the fulfilment of THERMAL and THERMAL+ keyboards.

Both parties wish to assure our customers that we are working together to have these keyboards in our customer’s hands by Q4/2022.

The encasements are completed and will be sea freighted to our Melbourne warehouse. Concurrently, the PCBs are now in production with an estimated lead time of six weeks.We appreciate your patience and understanding and look forward to everyone enjoying their Thermals!

Project Updates - June 2022

As we wait for products to arrive at our warehouse, we have been working on some items which will be included with our upcoming releases:

Microfiber Gloves:

Cleaning Cloths:

And some new products:
Playing Cards

WORK IN PROGRESS. Featuring holographic, foil and other premium features.

NFC Access Control Cards: 

We needed some elite access control cards for our office, so we decided to make our own! They’re stainless steel, weighing in at 25g and 0.8mm thick. There’s a deep-etched circular center on one side where the RFID chip sits, allowing us to not use the typical plastic lamination for one side of the card and have it remain full metal. They are laser etched, painted and have a lot of detail. These will first be available in stock alongside some of the other items arriving next month: The XO Team cap, XO Pens.

Collaboration Artisan Keycaps: 

We’ve received another batch of our collaboration caps which are currently being QC'd and packed by our warehousing team as quickly as possible to our distributors. For those who have purchased directly from us, please contact us through support@rama.works if you have moved/changed addresses and our team will be happy to assist as best we can.

XO Pens 

After initial QC we have opted to refinish the brass units of the XO PENS. We are expecting them to arrive by the end of this month leading up to the start of next month.
UPDATE: The first batch is inbound to our warehouse (the brass ones are being re-finished as we wernt’t satisfied with the finish of the brass units)

Chess Set: 

The first revision of the packaging came in which we are really happy with. It feels like a solid showcase piece you would want to keep on a coffee table. There have been some minor adjustments made and the second set of samples are en route.

JARS: 

We were expecting to receive the JARS last week, but the manufacturer has informed us of an issue with the rubber seals. The new gasket tooling will be finished by next week and the JARS will ship out that same week. We will post updates when this has been shipped through our socials e.g. Instagram, so please be sure to follow us if you haven’t already.
UPDATE: These are inbound to our warehouse.

60%/65% PCB's: 

The latest round of PCBs have arrived and we are currently performing further evaluation and testing. We are also remolding the PE Foam to adjust the sound signature and adding additional cutouts for the stabilisers.

THERMAL 

The SEQ 2 THERMAL units are in the final stages of assembly and packaging at the factory and will soon move to complete the assembly/packing of the THERMAL+ units. We will create another update when these are done and ready for sea-freight.

M60-B, M65-C, U80-B:

At this stage we’re looking at next year for fulfillment, we will keep updated if this is pushed forward.

KARA:

Pending the completion of the updated PCB’s we expect we can have the units completed soon after.

MATS: (IN PRODUCTION)

Packaging production is underway and when complete, will be assembled and shipped to our warehouse for fulfillment. We are expecting these to arrive in 2 months.

LOVE MATS DONATION:

Proceeds of our LOVE Mat edition MATS will be donated to Beyond Blue. Every month, thousands of people reach out to Beyond Blue for advice, support and information. Your donations go directly towards funding Beyond Blue’s Support Service so these calls don’t go unanswered. By supporting Beyond Blue, we are joining a community that is working to reduce the stigma, prejudice and discrimination that act as barriers to people reaching out for support. 

Doubleshot Keycaps  (KATE/CAPS):

The latest round of fine tuned samples have arrived and there are still very minor inconsistencies. We were still not 100% happy with the quality and again, Injection Molding is an iterative process - tooling after tooling changes until the end result is what’s expected. We are expecting to receive another batch soon, and will post pictures when they’re in.

INSTAGRAM 80K GIVEAWAY
We’ll be soon announcing a giveaway for reaching 80K followers, with a few exciting prizes!

🎁

U80

🎁

NEMO

🎁

MORE

🎁 U80 🎁 NEMO 🎁 MORE

Project Updates - April 2022

RAMA WORKS has invested our time and resources to continuously improve and bring the best quality products to our customers. Although we have constantly been trying our best to push all the products out on our end, we are unfortunately stuck with limitations. The Global Covid Pandemic has caused more delays this year, with businesses and logistics being completely shut, then reopening with reduced capacity causing a backlog. Understandably we know this is frustrating. However, we will continue to do our best and keep everything moving and work out ways to avoid this in the future.

Our team has been working on new and exciting ideas, which we want to source and produce locally to avoid any further halts to production due to the pandemic while supporting local businesses. So stay tuned to the magic our team has been working on!

Doubleshot Keycaps:
After receiving the last batch of samples a few weeks ago, we were not 100% happy with the quality. We made some adjustments to the doubleshot tooling, which is more involved due to the material shrinkage and material flow between the legends. The samples with the new adjustments will arrive soon, and we are confident they will meet our high-quality standards and proceed with production.

We’re also adjusting the case to have an extended internal hinge - we’ve received the updated sample of this and are happy with it, and it is what will be utilised for the end product.

Jar: Production nearly completed
After adjusting the top lid mould to increase the draft angle by 2 degrees to apply a heavier texture finish to improve the grip, we have also opted for a translucent finish for better wear, which would hide any visible scratches over time. Hopefully, if there are no further logistical delays due to covid restrictions with the supply chain, we should be on track to get these out in the next month as they are currently being all moulded.

For any further clarifications on your JARS order, please do not hesitate to get in contact with us at support@rama.work

Here’s how the finish is changing:

---

M6-C:

The M6-C PCB’s have finally arrived at our warehouse and are going through a rigourous quality check. We have the M6-C Dandy enclosures and GRID caps in our Melbourne Warehouse and will be ready to ship these shortly. We expect the remainder of the M6-C enclosures to be completed in 1-3 months. We’ll also make available in stock the new GRID colours we made for these.

RW KEYBOARD BUILD - SNAP AND WIN A U80 ⌨️ 😍 📸

Have you built your own RAMA WORKS Keyboard and want to add a U80 to your collection?!  💛 ⌨️ 🎁  

All you need to do is take a creative photo of your own RAMA WORKS Keyboard Build and share it on either Instagram, Facebook or Twitter & tag @ramaworks  including the hashtag #RWxMyKeyboardBuild. 

 The winning photo will be re-shared on all our social platforms 🥳

Our support team will get in contact with the winners via the information provided to organise your prize - we will do our best to provide the preferred colour keyboard to the winners - subject to availability ⌨️💛

👇Enter👇
Photo Competition Entry

Things to come:

👀

Global Updates:

Our manufacturing partners in Shenzhen / Shanghai have been placed under strict lockdown to curb the current COVID outbreak. This means that the global supply chain across all sectors will be disrupted for the foreseeable future. We are closely monitoring the situation and will continue to do our best under circumstances out of control. Thank you to all our loyal ongoing clients for their patients during these difficult times. We understand the delays can be frustrating, and in the ideal setting with no supply chain issues, we would be able to get the products to you in a timely manner. The past year has shown us how quickly things can change, so we are also adapting our Business by looking at new products we can source locally to avoid these issues and continue providing high-quality products.

Other Updates:

Timelines from the previous March update on our other products are still valid.

Project Updates - March 2022

We at RAMA WORKS place quality and care at our highest priority; we want to deliver a product we’re proud of.

Doubleshot Keycaps:
Two weeks ago, we received the latest batch of sample caps from the mould, and we’re still not completely satisfied with the legends on the modifier caps - we’ve outlined the changes we require and expect the next round of samples to arrive in 2-3 weeks or so. Again, Injection Molding is an iterative process - tooling after tooling changes until the end result is what’s expected. Doubleshot tooling is a bit more involved as the material shrinkage, and material flow between the legend and the casing needs to be accounted for. We’re confident that the keycaps will be completed relatively quickly once we receive samples we’re happy with. Of course, this is taking longer than expected, but we want what will be received by our customers to be what we expect.

We’re also adjusting the case to have an extended internal hinge - we’ve received the updated sample of this and are happy with it, and it is what will be utilised for the end product.

Jar:
These are almost production-ready; the top lid mould is being adjusted to increase the draft angle by 2 degrees to apply a heavier texture finish. The current texture does not have enough grip.

Here’s how the profile’s changing:

We can expect the production to complete in around 1-2 months.

THERMAL SEQ2 / THERMAL+:

We are expecting these to arrive in 2-4 months. We will have a fair amount of extra units available for these.

Pen:

Enclosures are done, and the included pen ink has been secured - we’re finalising the packaging. We should receive these in 1-2 months. We’ll also have extra’s available when they arrive and the original orders are shipped.

M6-C:

The M6-C PCB’s will be arriving in a month. We have the M6-C Dandy enclosures and GRID caps in our Melbourne Warehouse and will be ready to ship once the PCBs arrive. We expect the remainder of the M6-C enclosures to be completed in 1-3 months. We’ll also make available in-stock the new GRID colours we made for these.

Chess Set:

2-4 months until complete

KARA / M60-B / M65-C:

We’ve received the samples of the updated PCBs and are currently testing them before putting them into production. We’ve tested them in the KARA and M65 with ICED plates, and they feel really great; it provides a lot more dampening/give with the typing experience.

Metal Keycaps:

We are aiming to complete all outstanding keycaps within 1-4 months.

U80-A SEQ 2 Extras / Trays:
Being packed and going out ASAP!

Things to come:

BAT:

The moulded BATs are production-ready. We can’t wait for people to feel the quality and weight of these!

Jumpsuit:

These are production-ready and will launching alongside the BAT at a later date

Global Updates:

Our manufacturing partners in Shenzhen / Shanghai have been placed under strict lockdown in a bid to curb the current COVID outbreak. This means that the global supply chain across all sectors will be disrupted for the foreseeable future. We are closely monitoring the situation and the current advice is that the lockdown should lift by next Monday, 21 March.

Project Updates - Mid December 2021

The team here at RAMA WORKS have been very dedicated to getting our orders and updates on track, doing what we love and producing top quality products. Thank you to all our loyal customers for being patient and for everyone’s support. Here are the following updates for our current projects. We have also been working away on some exciting new projects to come next year!

ZENITH

STATUS: FINISHED FULFILMENT 

Our warehouse staff worked extremely hard to finish fulfilling all your orders. We hope all our customers are enjoying their brand new ZENITH. Make sure you share photos so we can see how yours have turned out! Tag @ramaworks on Instagram so we can reshare 🤗

If you have a support related inquiry, please contact us at support@rama.works or https://support.rama.care/

Remember to include your order number!

U80-A SEQ2

STATUS: FULFILMENT ABOUT TO COMMENCE 

PCB:

The PCBs are finally on their way to our warehouse as we speak! Fulfilment can commence as soon as they arrive at our Melbourne distribution centre. The warehouse team has been very busy organising in preparation for the final components to arrive so we can get all your orders out the door as soon as they land. 

ENCASEMENT:

Encasements, U80 backplates, and internal weights are at our warehouse, awaiting the remaining PCB’s to begin the fulfilment of our orders. 

We have been working around the clock to ensure that we can get these U-80-A SEQ 2 to all our customers after the long wait as soon as we receive all the necessary parts. We know this project has taken some time, and we thank you all for patiently waiting and being understanding of the current circumstances. 

THERMAL SEQ2/THERMAL+

STATUS: IN PRODUCTION

Thermal SEQ2 and Thermal+  encasement are now complete after the desired rose-gold colour has been rectified. These should hopefully be shipped off soon to our warehouse and awaiting other components to fulfil our customer orders expected late Q1 2022. We will keep everyone updated as soon as we have more information.

CAPS KEYSETS 

STATUS: FINAL DAY TO PREORDER

By popular demand and with a bit of help from our manufacturing partners, we are proud to offer this product at a lower price point (excluding CASE). We have made some adjustments to the tooling (Currently at Off-Tool Samples 3 [T3]) and are now finalising the double-shot legends, but overall are very happy - production will be relatively quick when the tooling is complete. Rest assured, the CAPS will be of the high-quality standard and aesthetic of RAMA WORKS® and we are super excited to hear and see these on whichever board they crown!

See below photos of the latest tooled samples:

M65-C 

STATUS: PRE-ORDER CLOSED - PRE-PRODUCTION COMMENCED 

The preorder period for M65-C is closed now, and production will commence shortly! Shipping will start when manufacturing/assembly is complete. Estimated fulfilment: start of Q3 2022

RAMA’S BURGERS T-SHIRT / INVENTORY 2 / KEYCAP

STATUS: AWAITING TRANSIT

We have received some inventory for the RAMA’S Burgers collection. We are waiting for the rest of the inventory to arrive before fulfilment to our customers will commence. We will update everyone as soon as the rest of the products land.

CHESS SET 01 

STATUS: IN PRODUCTION

CHESS PIECES:

After careful consideration, we have opted to proceed with a more classical chess set look (white and black) with ceramic coating for durability and a superior finish. We have also installed silicone feet on the pieces to protect the board’s surface and prevent slipping. 

BOARD

The board features a thick 14mm acrylic base, with silkscreen graphics on the underside - encasing it below the crystal housing. The design of the board has remained essentially the same.

We always aim to provide the most pleasing end-user experience hence the change in finishing for the pieces. If you have any concerns or queries regarding your order, please contact us at support@rama.works or https://support.rama.care/

XO PEN 

STATUS: IN PRODUCTION

The ink refill for the XO PEN is currently being sourced.

TRAY

STATUS: IN PRODUCTION

Production will be completed by the end of the month. Fulfilment of orders will begin when the TRAY arrive at our Melbourne distribution centre. 

JARS

STATUS: PRE-PRODUCTION 

The preorder period for the JARS has ended. Pre-production is currently underway. 

KARA SEQ2

STATUS: IN PRODUCTION

RAMA WORKS® x @st_ali 🇮🇹💚☕️🤍☕️❤️🇦🇺

Status: WIP

Project Updates - September 2020

THERMAL

The THERMAL units have arrived at our warehouse. Preparation for shipping begins this Monday! There will be extras once all of the pre-orders are shipped.

U80-A SEQ1 EXTRAS

Fulfilment for SEQ1 is more or less complete! We’ll be performing a stock count on Monday to confirm the numbers. Expect to see the sale shortly after - date and time will be announced!

JULES

Jules is now heavily in the machining stage - they’re expected to complete by the end of October/early November currently.

M65-B

M65-B is currently being packaged at the factory - they’ll be shipped to our warehouse once complete. The PCBs are due to be complete at the end of the month and sent to us for early October arrival. The MUTE mounts have already arrived at our warehouse.

M60-A LNY/OLIVIA

Similar to Jules, these are heavily in machining, they’re expected to complete by the end of October/early November.

M50-A + GRID SET B Keycaps

The M50-A units are also in machining currently and are expected to complete by the end of October/early November. The GRID SET B Keycaps are in stock and ready to ship.
KEYCAPS STORE

ZENITH

Production has officially begun for Zenith and they’re currently in the early stages of machining.

CANVAS

The Canvas deskmats are scheduled to ship from our manufacturer to our box supplier at the end of the month for packing - then shipped to our warehouse for fulfilment. Expect another month for sea-freight.

TRAY

The TRAYs are currently in production. We’ll post a further update once we receive an ETA from our manufacturer. UPDATE: Expected to complete around the end of October/Early November.

KATE

The double-shot mould production for the KATE keycaps has begun! We've finalised the placement of the legends for the tooling and progress is being made! We're working on the packaging in the meantime and can't wait to show more.

KARA

The surface finish is now being added to the mould and the master colour batches are being mixed to our specified colours. We are expecting to receive these in the following weeks. Once these are inspected, tested and signed off - we can begin the pre-order! We were really hoping KARA would be ready by the end of this month but as we mentioned in previous updates, we want to get this product exactly right as it’s our favourite to date - we cannot wait for people to try these out for themselves! We’re working on a line of accessories for the KARA series as well.

NEMO Decommission 2

The pre-order for NEMO Decommission 2 closes on the 30th of September. Production will start immediately afterwards.
NEMO PRE-ORDER

COLLABORATION CAPS

We've added the new RWxNK WAVE SEQ2 cap to our store! This cap is machined from Stainless Steel and features a unique chromatic Blue/Purple PVD. This coating is tough to produce as it requires multiple PVD coatings to achieve the multi-colour finish.
KEYCAPS STORE

NEMO / LNY + GMK Caps/ U80-A

NEMO

NEMO’s are all mostly packed! We’re super keen to see what special edition numbers everyone receives - look out for your tracking numbers soon.

The W01 cars still to arrive due to the huge weight required for air-freight it needs to be split up.

LNY + GMK Caps

All these caps are now in our warehouse and are going to be packed and shipped to our distributors over the following week! LNY Caps will be shipping out also.

GMK Camping
GMK First Love
GMK Fuyu
GMK B Emoji
GMK Phosphorous
GMK Metaverse R2
GMK Peach Blossom
GMK Terra
GMK Dracula
GMK Darling
GMK Finer Things
KAT Jade
KAT Oasis
GMK Nautilus Nightmares
GMK Ursa
Shrimp on the Barbie

U80-A

The U80-A first shipment of 9 pallets is loaded into a container and is awaiting to leave port on the 13th of this month. We appreciate everyone’s patience and will provide another update when it leaves port and an ETA of arrival! Everything is ready on our end for when the U80-A's arrive so we can pack and ship them out as quickly as we can ☺️

Extra Goodies

To help make up for the wait with some of the items, we’ve made some extra inclusions to ship with some products, this includes:

Film Canister
Hot Shoe
NEMO
RW01

Now, all these products have been fully completed, and we’re just waiting for them to arrive at our warehouse, which we expect to happen in the following weeks (longer than usual given the reduced global transit lanes in shipping).

Each of the above products will come packaged with our fabric dust bags; we’ll also be including some other items with each order.

We were hoping to release our custom jacquard fabric with this extra inclusion, but unfortunately, with fabric mills busy around the globe. We will be making products with our custom fabric in the future. This is the RAMA WORKS HOLDINGS - RWH - Monogram:

RWxRW S4:W2 Challenge

RAMA WORKS® x Render Weekly

S4:W2

The challenge is to redesign the base of the M6 and render the product. We will select our favorite design and produce a limited edition RWxRW M6. Consider which materials, colours and combinations you would like to use. Always consider manufacturing constraints with your design - the base will be CNC machined. You can use any materials you think would look best in combination - Brass with PVD coating, Anodised Aluminium, Titanium etc.

The winner will receive a free limited edition M6 from the production run. The 2nd and 3rd place designs will receive a discount to any products on the site.

Click here for more details!

WAVE Ti / M60-A SEQ2 / M6-C / Caps & more!

WAVE SEQ2 Ti

The Titanium Wave caps have arrived in our warehouse and will be shipping out once packaged. These, we think, are our best keycaps yet - the smoothness of the finish surpasses any we have made before. We’re excited for people to receive these!
We have a limited amount left in stock available to order.

M60-A SEQ2 Starter Kits

As we await the M60-A SEQ2’s to arrive, we’re packaging a lot of the accessories that will be shipping with some orders. The M60’s are due to arrive later this month in our warehouse for order-packing and shipping.

M6-B PCB’s

The M6-B PCB’s have arrived for the M6-C production. Orders of just the PCB will be shipped when packaged. We’re also awaiting the enclosures and GRID keycaps for the M6-C shipments to go out.

Switchpuller XO

A large number of Switchpuller orders have gone out - and we’re looking forward to seeing these to good use! We have a large amount in stock for anyone who wants one.

New packaging and TEAM Caps

The packaging we were waiting on has arrived and we have started to ship the TEAM Caps. If you have ordered a TEAM Cap alongside other in-stock items, it will be going out.

Collaboration Keycaps - MIZU

The MIZU Collaboration keycaps have arrived and are being packaged to be sent to the distributors. We’re really happy with how these turned out and the blue glow!

Collaboration Keycaps - Shipping!

GMK STRIKER / WAVEZ / OBLIVION - Collaboration Keycaps

We’ve arranged a new area in our warehouse to package and ship our collaboration caps out. They will be packed this week and shipped as soon as possible to all vendors which offered them!

NEMO Overview Video / THERMAL Typing Video

NEMO 네모 - Overview Video

Overview of our collectible mascot, NEMO, and its collectible RW01 car!

RAMA WORKS® FOUNDRY - THERMAL - Typing Video

Keyboard: wilba.tech Thermal KURO (HHKB) with HALT plate
Plate: 1.5mm Aluminium with 90mm x 1.5mm leaf springs
Keycaps: GMK White on Black with GMK Ceresia accents
Switches: Gateron Black Ink
Lube: GHv4 (thin variant)

And some images behind the scenes

Introducing NEMO 네모 / Camera Accessories

HELLO!

My name is NEMO 네모, I am *the* RAMA WORKS® Cubing.

It’s been super hard keeping this project under wraps - since November last year!
But we’re super excited to introduce you to NEMO. He’s our new brand mascot and now a collectible edition, retired NEMO bots from our workshop. Please follow the links below to learn more!

---

RAMA WORKS® X MIGHTYKILLERS®

Now available for preorder until the 30th of September, 5:00 PM PST

---

XO SWITCHPULLER

The XO Switchpullers are available for pre-order and will be shipped early September!

M60-A SEQ2 PCBs / KOYU Extras / 16th August Launch

M60-A SEQ2 PCBs

The M60-A (Hotswap) PCB’s and M60-Ax (Solderless) PCB’s have arrived in our warehouse and are being packed in preparation for the enclosure arrivals. The M60-A SEQ2 enclosures are in the final stages of production and will be ready in the next month or so for final packaging and shipment! Orders of the individual PCB’s will be sent out this month.

KOYU Extras

The KOYU extra’s will be shipped this week. For those that missed out, the KOYU will be returning in a new revision within 2 months.

16 08 19 17 00 PST

Our latest product will be launching alongside the RAMA WORKS® x MIGHTYKILLERS® Film Canisters. We’re very excited to show what it is!

RAMA WORKS® x MIGHTYKILLERS® Camera Accessories - Launch announcement

16 8 19 17 00 PST

We’re launching two very exciting products this August, one we’ve been showing for a while now (our camera accessories) and another we have kept under wraps since December last year. We’re super excited to show what we’ve been working on!

What else is to come

U80-A Typing & LEDs Overview Video / Collaboration Keycaps July 01

U80-A Overview Video 02

We’ve created another video to show the lighting modes on the U80-A and typing with tactile switches.

We film our videos using a stereo microphone configuration and a D65 lighting setup.

Collaboration Keycaps

Here are the latest collaboration keycaps available. We’ll also be making an archive/library of all current, previous and upcoming collaboration keycaps available.

GMK Dots

PVD Brass

GMK Peaches n Cream

Anodised Aluminium with enamel infill

GMK Vaporwave Collaboration Cap

Multicolour PVD Stainless Steel

U80-A Colour Samples / KOYU Arrival / RW Merch / Collab Caps / LP Caps

U80-A Colour Samples

Here are some colour examples of what we are offering with the U80-A Pre-Order. As seen on the U80 and our previous offerings.

PORT as seen on the U80-A

U80-A PORT

U80-A PORT w/ MILK Artisan Keycap

MILK as seen on the M60-A SEQ2

M60-A SEQ2 MILK

KURO as seen on the KOYU

KOYU KURO

LAKE as seen on the U80-A

U80-A LAKE

MOON as seen on the M60-A

M60-A MOON

M60-A MOON

U80-A Typing & Assembly video

We made a video showing what the stock U80-A sounds like with the optional switches which are included with the Starter Kit, the Gateron Silent Ink Switches. Also shown is how the the U80-A is assembled.

KOYU Arrival

The KOYU’s are landing in Melbourne and should arrive in our warehouse this week or next. We will package and ship these out as soon as possible!

RW Merch - Team Cap

Our team caps are in production and will be available through our webstore next month - these come packaged individually with their own RW Dust Bag. Alongside the caps, we’ll be releasing our Team T-Shirts and XO Sweaters. These caps will come in KURO and MILK variants.

Subtle RW Logo Mark Embroidered

Underside Branding

Rama Works Logo Mark branded buckle

Sandwiched brim design with lasercut XO underside and embroidering across

Collaboration Keycaps

We’ve been shipping out our latest batch of Collab caps to our vendors with our GMK/EPBT Keyset collaborations. We hope to see them on some keyboards soon!

EPBT Kuro Shiro - KURO PVD with White Enamel Fill - Brass

GMK Bento - GOLD PVD - Brass

GMK Bento - Anodised with White Enamel Fill - Aluminium

GMK Minimal - KURO PVD with White Enamel Fill - Brass

Low Profile Keycaps

Our first tool samples have arrived and we are happy with the initial results - however, we will be making some adjustments to improve the overall look and function of the keycaps. We will also be increasing the finish of the underside of the cap to diffuse more light and other mechanical adjustments.

These keycaps will be available for pre-order until July 10th through our webstore: https://rama.link/gridcaps

Rama Works x MIGHTYKILLERS® Photography Accessories - Development

135 Film 2U Canister

After receiving feedback from MIGHTYKILLERS® on the 2U prototype of the film canister, we’ve made some adjustments that we think will make it ready for market. We’re currently waiting on the second round of prototypes for review. We’ve added a new closure system to the top lid to make it quicker and more satisfying to open and close the film canister lids. Instead of the previous twist-lock cap, we’re utilizing our new pushbutton cam-lock that will snap the lid in when simply pushing it into the enclosure.

Here is what the Rama Works - Pushbutton cam-lock mechanism looks like.

Past this, we’re looking to introduce a new material / edition to the lineup. Mirror-Polished Aluminium. This edition will beautifully wear as used, giving itself character and stories over time. We’ve also increased the specifications on the black-anodised film canister to be a Military Spec Type III hard-anodising - this will increase it’s strength and resistance to scratches and wear.

PHOTOS FROM MIGHTYKILLERS®

Here are some images from MIGHTYKILLERS® of the round 1 prototype!

M60-A INCOMING / PARVUM / MIGHTYKILLERS

M60-A

The M60-A enclosures are landing tomorrow by sea-freight in Melbourne (1st of November)! The container will then be going through customs and then delivered to our warehouse once cleared. Once in our warehouse we will aim to ship out the M60-A keyboards as quickly as possible!

PARVUM ITX CASE

We’re excited to be showing some of the work for the design we have created for PARVUM SYSTEMS. We will be creating a prototype for them and we will reveal more details to follow once tested. All panels are machined from Aluminium.

MIGHTYKILLERS

We’ve been wanting to do camera accessories for a long time now, and a great opportunity came up with someone we’ve been following for a while with MIGHTYKILLERS. We have designed for them a series of accessories that we look forward to releasing to the market. To be released: 135 Dual Film Canister, 120 Quad Film Canister, Soft Release & a Cold Shoe Cover.

KOYU

One month remains to join the KOYU preorder. In the following weeks we will be showing more of the board and its capabilities/design. Pictured below is the hand-polished mirror finish PVD brass TANK Edition.