Project Updates - June 2022

As we wait for products to arrive at our warehouse, we have been working on some items which will be included with our upcoming releases:

Microfiber Gloves:

Cleaning Cloths:

And some new products:
Playing Cards

WORK IN PROGRESS. Featuring holographic, foil and other premium features.

NFC Access Control Cards: 

We needed some elite access control cards for our office, so we decided to make our own! They’re stainless steel, weighing in at 25g and 0.8mm thick. There’s a deep-etched circular center on one side where the RFID chip sits, allowing us to not use the typical plastic lamination for one side of the card and have it remain full metal. They are laser etched, painted and have a lot of detail. These will first be available in stock alongside some of the other items arriving next month: The XO Team cap, XO Pens.

Collaboration Artisan Keycaps: 

We’ve received another batch of our collaboration caps which are currently being QC'd and packed by our warehousing team as quickly as possible to our distributors. For those who have purchased directly from us, please contact us through support@rama.works if you have moved/changed addresses and our team will be happy to assist as best we can.

XO Pens 

After initial QC we have opted to refinish the brass units of the XO PENS. We are expecting them to arrive by the end of this month leading up to the start of next month.
UPDATE: The first batch is inbound to our warehouse (the brass ones are being re-finished as we wernt’t satisfied with the finish of the brass units)

Chess Set: 

The first revision of the packaging came in which we are really happy with. It feels like a solid showcase piece you would want to keep on a coffee table. There have been some minor adjustments made and the second set of samples are en route.

JARS: 

We were expecting to receive the JARS last week, but the manufacturer has informed us of an issue with the rubber seals. The new gasket tooling will be finished by next week and the JARS will ship out that same week. We will post updates when this has been shipped through our socials e.g. Instagram, so please be sure to follow us if you haven’t already.
UPDATE: These are inbound to our warehouse.

60%/65% PCB's: 

The latest round of PCBs have arrived and we are currently performing further evaluation and testing. We are also remolding the PE Foam to adjust the sound signature and adding additional cutouts for the stabilisers.

THERMAL 

The SEQ 2 THERMAL units are in the final stages of assembly and packaging at the factory and will soon move to complete the assembly/packing of the THERMAL+ units. We will create another update when these are done and ready for sea-freight.

M60-B, M65-C, U80-B:

At this stage we’re looking at next year for fulfillment, we will keep updated if this is pushed forward.

KARA:

Pending the completion of the updated PCB’s we expect we can have the units completed soon after.

MATS: (IN PRODUCTION)

Packaging production is underway and when complete, will be assembled and shipped to our warehouse for fulfillment. We are expecting these to arrive in 2 months.

LOVE MATS DONATION:

Proceeds of our LOVE Mat edition MATS will be donated to Beyond Blue. Every month, thousands of people reach out to Beyond Blue for advice, support and information. Your donations go directly towards funding Beyond Blue’s Support Service so these calls don’t go unanswered. By supporting Beyond Blue, we are joining a community that is working to reduce the stigma, prejudice and discrimination that act as barriers to people reaching out for support. 

Doubleshot Keycaps  (KATE/CAPS):

The latest round of fine tuned samples have arrived and there are still very minor inconsistencies. We were still not 100% happy with the quality and again, Injection Molding is an iterative process - tooling after tooling changes until the end result is what’s expected. We are expecting to receive another batch soon, and will post pictures when they’re in.

INSTAGRAM 80K GIVEAWAY
We’ll be soon announcing a giveaway for reaching 80K followers, with a few exciting prizes!

🎁

U80

🎁

NEMO

🎁

MORE

🎁 U80 🎁 NEMO 🎁 MORE

Project Updates - April 2022

RAMA WORKS has invested our time and resources to continuously improve and bring the best quality products to our customers. Although we have constantly been trying our best to push all the products out on our end, we are unfortunately stuck with limitations. The Global Covid Pandemic has caused more delays this year, with businesses and logistics being completely shut, then reopening with reduced capacity causing a backlog. Understandably we know this is frustrating. However, we will continue to do our best and keep everything moving and work out ways to avoid this in the future.

Our team has been working on new and exciting ideas, which we want to source and produce locally to avoid any further halts to production due to the pandemic while supporting local businesses. So stay tuned to the magic our team has been working on!

Doubleshot Keycaps:
After receiving the last batch of samples a few weeks ago, we were not 100% happy with the quality. We made some adjustments to the doubleshot tooling, which is more involved due to the material shrinkage and material flow between the legends. The samples with the new adjustments will arrive soon, and we are confident they will meet our high-quality standards and proceed with production.

We’re also adjusting the case to have an extended internal hinge - we’ve received the updated sample of this and are happy with it, and it is what will be utilised for the end product.

Jar: Production nearly completed
After adjusting the top lid mould to increase the draft angle by 2 degrees to apply a heavier texture finish to improve the grip, we have also opted for a translucent finish for better wear, which would hide any visible scratches over time. Hopefully, if there are no further logistical delays due to covid restrictions with the supply chain, we should be on track to get these out in the next month as they are currently being all moulded.

For any further clarifications on your JARS order, please do not hesitate to get in contact with us at support@rama.work

Here’s how the finish is changing:

---

M6-C:

The M6-C PCB’s have finally arrived at our warehouse and are going through a rigourous quality check. We have the M6-C Dandy enclosures and GRID caps in our Melbourne Warehouse and will be ready to ship these shortly. We expect the remainder of the M6-C enclosures to be completed in 1-3 months. We’ll also make available in stock the new GRID colours we made for these.

RW KEYBOARD BUILD - SNAP AND WIN A U80 ⌨️ 😍 📸

Have you built your own RAMA WORKS Keyboard and want to add a U80 to your collection?!  💛 ⌨️ 🎁  

All you need to do is take a creative photo of your own RAMA WORKS Keyboard Build and share it on either Instagram, Facebook or Twitter & tag @ramaworks  including the hashtag #RWxMyKeyboardBuild. 

 The winning photo will be re-shared on all our social platforms 🥳

Our support team will get in contact with the winners via the information provided to organise your prize - we will do our best to provide the preferred colour keyboard to the winners - subject to availability ⌨️💛

👇Enter👇
Photo Competition Entry

Things to come:

👀

Global Updates:

Our manufacturing partners in Shenzhen / Shanghai have been placed under strict lockdown to curb the current COVID outbreak. This means that the global supply chain across all sectors will be disrupted for the foreseeable future. We are closely monitoring the situation and will continue to do our best under circumstances out of control. Thank you to all our loyal ongoing clients for their patients during these difficult times. We understand the delays can be frustrating, and in the ideal setting with no supply chain issues, we would be able to get the products to you in a timely manner. The past year has shown us how quickly things can change, so we are also adapting our Business by looking at new products we can source locally to avoid these issues and continue providing high-quality products.

Other Updates:

Timelines from the previous March update on our other products are still valid.

Project Updates - March 2022

We at RAMA WORKS place quality and care at our highest priority; we want to deliver a product we’re proud of.

Doubleshot Keycaps:
Two weeks ago, we received the latest batch of sample caps from the mould, and we’re still not completely satisfied with the legends on the modifier caps - we’ve outlined the changes we require and expect the next round of samples to arrive in 2-3 weeks or so. Again, Injection Molding is an iterative process - tooling after tooling changes until the end result is what’s expected. Doubleshot tooling is a bit more involved as the material shrinkage, and material flow between the legend and the casing needs to be accounted for. We’re confident that the keycaps will be completed relatively quickly once we receive samples we’re happy with. Of course, this is taking longer than expected, but we want what will be received by our customers to be what we expect.

We’re also adjusting the case to have an extended internal hinge - we’ve received the updated sample of this and are happy with it, and it is what will be utilised for the end product.

Jar:
These are almost production-ready; the top lid mould is being adjusted to increase the draft angle by 2 degrees to apply a heavier texture finish. The current texture does not have enough grip.

Here’s how the profile’s changing:

We can expect the production to complete in around 1-2 months.

THERMAL SEQ2 / THERMAL+:

We are expecting these to arrive in 2-4 months. We will have a fair amount of extra units available for these.

Pen:

Enclosures are done, and the included pen ink has been secured - we’re finalising the packaging. We should receive these in 1-2 months. We’ll also have extra’s available when they arrive and the original orders are shipped.

M6-C:

The M6-C PCB’s will be arriving in a month. We have the M6-C Dandy enclosures and GRID caps in our Melbourne Warehouse and will be ready to ship once the PCBs arrive. We expect the remainder of the M6-C enclosures to be completed in 1-3 months. We’ll also make available in-stock the new GRID colours we made for these.

Chess Set:

2-4 months until complete

KARA / M60-B / M65-C:

We’ve received the samples of the updated PCBs and are currently testing them before putting them into production. We’ve tested them in the KARA and M65 with ICED plates, and they feel really great; it provides a lot more dampening/give with the typing experience.

Metal Keycaps:

We are aiming to complete all outstanding keycaps within 1-4 months.

U80-A SEQ 2 Extras / Trays:
Being packed and going out ASAP!

Things to come:

BAT:

The moulded BATs are production-ready. We can’t wait for people to feel the quality and weight of these!

Jumpsuit:

These are production-ready and will launching alongside the BAT at a later date

Global Updates:

Our manufacturing partners in Shenzhen / Shanghai have been placed under strict lockdown in a bid to curb the current COVID outbreak. This means that the global supply chain across all sectors will be disrupted for the foreseeable future. We are closely monitoring the situation and the current advice is that the lockdown should lift by next Monday, 21 March.

PROJECT UPDATES - MID-JANUARY 2022 + LNY GIVEAWAY

To celebrate the Year of the Tiger, we want to share a little love with a festive keyboard. We looked deep into our archives and found a rare piece to give to one lucky winner for free !!!

Yes, you heard that right 😍👏

PRIZES:

1 x M60-A LNY20 Edition in RACE (Red Aluminium) with GOLD (Brass) Backweight. Valued at USD 360 and the LAST unit in existence.

3 x INVENTORY 2 LNY20 (Red Aluminium). Valued at USD 59 each.

TO ENTER

✔️Follow @ramaworks

✔️Tag a friend to share the love

✔️Tell us your New Year's resolution

It's as simple as that 😀

A winner will be drawn at random on January 31st from all eligible entrants and notified via DM for your details. Another three valid entrants will be randomly selected for the LNY inventory wallets.

Good luck everyone 🐯🧧🧨
Enter Now

---

PROJECT UPDATES

We are wishing everyone a Happy New Year! The team here at RAMA WORKS is excited to start fresh and work away at new projects.

The Chinese New Year will fall on Tuesday, February 1st, 2022, starting the Year of the Tiger. Celebrations traditionally last for 3-4 weeks and will result in a halt in manufacturing during the holiday; however, we have many products arriving before this, which our Melbourne warehouse will continue to operate for fulfilment.

Here are the updates for our current projects:

U80-A SEQ2

STATUS: FULFILMENT IN PROGRESS

We have been working around the clock to ensure that you all receive your U80-A SEQ 2 after the long wait. We know this project has taken some time, and we thank you all for patiently waiting and being understanding of the current circumstances. We hope you enjoy your U80-A and make sure to take a snap of your build and tag @ramaworks so we can see your creation!

Please make sure your shipping address is up to date! You can check by logging in at https://ramaworks.store/account/login and navigating to your order. 

Note: Changing your default address will not update past orders.

If you need to correct your shipping address, please get in touch with us at support@rama.works or https://support.rama.care/

Remember to include your order number!

M60-B

STATUS: PRE-ORDER OPEN 

The famed M60 silhouette returns with newly updated internals with the removal of the integrated plate in favour of the gasket mounted sub-assembly. Keeping its aesthetic beauty from its predecessor, first released in 2018, the M60-B has been re-engineered & designed to provide a modern typing experience with added compatibility with our KARA range. Pre-order closes on January 31st. 

You can purchase the refreshed design with new innovative features using the link below: 

https://ramaworks.store/products/m60-b 

THERMAL SEQ2/THERMAL+

STATUS: IN PRODUCTION

PCB manufacturing will start in late February after the Chinese New Year festive period. Customer orders are expected to begin fulfilling in late Q2 2022. We will keep everyone updated as soon as we have more information on the PCBs completion and arrival at our warehouse.

CAPS/KATE KEYSETS 

STATUS: PRE-ORDER CLOSED - PRE-PRODUCTION COMMENCED 

We are finalising the legends and working on adjusting the casing tooling. Shipping will begin when manufacturing/assembly is complete. 

M65-C 

STATUS: PRE-ORDER CLOSED - PRE-PRODUCTION COMMENCED 

The preorder period for M65-C is closed now, and production will commence shortly! Shipping will start when manufacturing/assembly is complete. Estimated fulfilment: Q4 2022

RAMA'S BURGERS T-SHIRT / INVENTORY 2 / KEYCAP

STATUS: FULFILMENT ABOUT TO COMMENCE 

After receiving some inventory for the RAMA's Burger collection, we were hopeful the remaining would have arrived in December. Unfortunately, that was not the case due to a backlog in shipping and covid cases halting daily limits of shipments and delays, which were out of our control. 

The good news…. 

We will have all the inventory shipped to us before Chinese New Year, so our warehouse will fulfil orders as soon as they arrive in Melbourne! 

Please make sure your shipping address is correct! You can check by logging in at https://ramaworks.store/account/login and navigating to your order. 

Note: Updating your default address will not update past orders.

If you need to update your shipping address, please get in touch with us at support@rama.works or https://support.rama.care/.

Remember to include your order number!

CHESS SET 01 

STATUS: IN PRODUCTION

CHESS PIECES:

After careful consideration, we have opted to proceed with a more classical chess set look (white and black) with ceramic coating for durability and a superior finish. We have also installed silicone feet on the pieces to protect the board's surface and prevent slipping. 

BOARD

The board features a thick 14mm acrylic base, with silkscreen graphics on the underside - encasing it below the crystal housing. The design of the board has remained essentially the same.

We always aim to provide the most pleasing end-user experience hence the change in finishing for the pieces. If you have any concerns or queries regarding your order, don't hesitate to get in touch with us at support@rama.works or: https://support.rama.care/.

XO PEN 

STATUS: PRODUCTION NEARLY FINISHED 

We will be receiving the XO PENS next month! Fulfilment of orders will begin when stock arrives at our Melbourne Distribution Center. 

TRAY

STATUS: PRODUCTION COMPLETED - FULFILLMENT ABOUT TO COMMENCE  

The TRAYS will be arriving this month so our warehouse can fulfil customer orders as soon as they arrive. 

JARS

STATUS: PRE-PRODUCTION 

The preorder period for the JARS has ended. Pre-production is currently underway. 

KARA SEQ2

STATUS: IN PRODUCTION

Production for the encasements is underway. We have changed the PCB design to add the flex cuts with the prototype arriving after Chinese New Year. Production on the new, improved design of the PCB can begin shortly after. We will keep everyone updated as soon as we have more information on when fulfilment can commence. 

BAT

STATUS: Pre-Production

The latest off-tool samples have come out of the moulds with their final texture finish and are inbound to our HQ. We can't wait to show the pre-production samples when they land!

Happy Holidays!

Our team has been working extremely hard the last few months to catch up on our backlog from the Melbourne lockdown restrictions. We will be taking just a few days off for the holiday season for a well-deserved break. It has been a challenging year for everyone with the worldwide global pandemic. We appreciate everyone’s patience and support this past year. We understand the delays would have been frustrating for our customers, which was out of our control. In saying that, we are ready and excited to start the New Year fresh and keep producing new and innovative products we know you will all love. From our RAMA WORKS family to yours - we wish you all a Merry Christmas and a Happy New Year.

---

The M60-B PCB features flex-cuts to provide an enhanced typing experience - we'll also be including this upgrade to the KARA SEQ2 orders along with the additional PE Foam layer! 🎁

Project Updates - Mid December 2021

The team here at RAMA WORKS have been very dedicated to getting our orders and updates on track, doing what we love and producing top quality products. Thank you to all our loyal customers for being patient and for everyone’s support. Here are the following updates for our current projects. We have also been working away on some exciting new projects to come next year!

ZENITH

STATUS: FINISHED FULFILMENT 

Our warehouse staff worked extremely hard to finish fulfilling all your orders. We hope all our customers are enjoying their brand new ZENITH. Make sure you share photos so we can see how yours have turned out! Tag @ramaworks on Instagram so we can reshare 🤗

If you have a support related inquiry, please contact us at support@rama.works or https://support.rama.care/

Remember to include your order number!

U80-A SEQ2

STATUS: FULFILMENT ABOUT TO COMMENCE 

PCB:

The PCBs are finally on their way to our warehouse as we speak! Fulfilment can commence as soon as they arrive at our Melbourne distribution centre. The warehouse team has been very busy organising in preparation for the final components to arrive so we can get all your orders out the door as soon as they land. 

ENCASEMENT:

Encasements, U80 backplates, and internal weights are at our warehouse, awaiting the remaining PCB’s to begin the fulfilment of our orders. 

We have been working around the clock to ensure that we can get these U-80-A SEQ 2 to all our customers after the long wait as soon as we receive all the necessary parts. We know this project has taken some time, and we thank you all for patiently waiting and being understanding of the current circumstances. 

THERMAL SEQ2/THERMAL+

STATUS: IN PRODUCTION

Thermal SEQ2 and Thermal+  encasement are now complete after the desired rose-gold colour has been rectified. These should hopefully be shipped off soon to our warehouse and awaiting other components to fulfil our customer orders expected late Q1 2022. We will keep everyone updated as soon as we have more information.

CAPS KEYSETS 

STATUS: FINAL DAY TO PREORDER

By popular demand and with a bit of help from our manufacturing partners, we are proud to offer this product at a lower price point (excluding CASE). We have made some adjustments to the tooling (Currently at Off-Tool Samples 3 [T3]) and are now finalising the double-shot legends, but overall are very happy - production will be relatively quick when the tooling is complete. Rest assured, the CAPS will be of the high-quality standard and aesthetic of RAMA WORKS® and we are super excited to hear and see these on whichever board they crown!

See below photos of the latest tooled samples:

M65-C 

STATUS: PRE-ORDER CLOSED - PRE-PRODUCTION COMMENCED 

The preorder period for M65-C is closed now, and production will commence shortly! Shipping will start when manufacturing/assembly is complete. Estimated fulfilment: start of Q3 2022

RAMA’S BURGERS T-SHIRT / INVENTORY 2 / KEYCAP

STATUS: AWAITING TRANSIT

We have received some inventory for the RAMA’S Burgers collection. We are waiting for the rest of the inventory to arrive before fulfilment to our customers will commence. We will update everyone as soon as the rest of the products land.

CHESS SET 01 

STATUS: IN PRODUCTION

CHESS PIECES:

After careful consideration, we have opted to proceed with a more classical chess set look (white and black) with ceramic coating for durability and a superior finish. We have also installed silicone feet on the pieces to protect the board’s surface and prevent slipping. 

BOARD

The board features a thick 14mm acrylic base, with silkscreen graphics on the underside - encasing it below the crystal housing. The design of the board has remained essentially the same.

We always aim to provide the most pleasing end-user experience hence the change in finishing for the pieces. If you have any concerns or queries regarding your order, please contact us at support@rama.works or https://support.rama.care/

XO PEN 

STATUS: IN PRODUCTION

The ink refill for the XO PEN is currently being sourced.

TRAY

STATUS: IN PRODUCTION

Production will be completed by the end of the month. Fulfilment of orders will begin when the TRAY arrive at our Melbourne distribution centre. 

JARS

STATUS: PRE-PRODUCTION 

The preorder period for the JARS has ended. Pre-production is currently underway. 

KARA SEQ2

STATUS: IN PRODUCTION

RAMA WORKS® x @st_ali 🇮🇹💚☕️🤍☕️❤️🇦🇺

Status: WIP

Project Updates - Early May 2021

M60-A OLIVIA/LNY20

Almost all M60-A OLIVIA and LNY20 orders have now shipped out.

There are still a small handful of OLIVIA TANK and KURO LNY20 orders (including accessory orders) that are yet to be shipped due to a miscounted/mispacked shipment from our manufacturer. 

These remaining units are already on their way to our warehouse and will be shipped as soon as they arrive.

If you have not yet received your shipping confirmation for your order, then your order is very likely part of this handful.

If you are unsure whether your order is affected, please feel free to contact us by emailing support@rama.works or submitting a ticket at https://support.rama.care/ 

JULES/M50-A

The PCBs for Jules and M50-A have been completed and are currently enroute to our warehouse.

KARA

In the meantime, KARA fulfilment is in full swing.

Our fulfilment team is hard at work every day shipping the orders out. Given the sheer volume of units, we kindly ask everyone to be patient.

To allow our support team to more quickly and efficiently reply, we will no longer be responding to emails/tickets asking for individual order ETAs. 

Rest assured, we will announce when KARA fulfilment is complete.

We have also hired extra full-time staff who will be joining us this month to help push out orders quicker!

ZENITH

Zenith is currently being organised for shipping from our manufacturer to our warehouse.

U80-A SEQ2

Unfortunately, we will not be able to begin fulfilment by mid-Q2 as originally expected. However, some of the U80-A SEQ2 units have completed manufacturing.

We’ll post an ETA once our manufacturer can provide a more accurate timeline for when the completed units can ship over to our warehouse.

IN STOCK ITEMS

Our current priority on shipping keyboards may cause some delay to shipment of in-stock items. We expect this to smooth out as we refine our shipment processes alongside the addition of new staff.

We thank everyone for their continued support and patience during this busy period!

Project Updates - Early March 2021

M65-B ICED 

The M65-B ICED units landed in dock earlier this week and are currently undergoing customs clearance. We expect to receive them by the end of this week. This shipment includes the ICED plates and bases. 

If you have an order with a non-ICED M65-B and an ICED accessory, it’ll now be ready to ship once they come in.

M60-A OLIVIA/LNY20

The M60-A units have also landed alongside the M65-B ICED units. Fulfilment will begin after M65-B completes.

M50-A + JULES

M50-A and Jules are currently still in transit via sea freight. More news will be included in the next update once we have an expectation of when they will land. 

U80-A SEQ2

We know many of you have been waiting for U80-A SEQ2 updates! 

Currently, we’re expecting to begin fulfilment by mid-Q2 and finish by early Q3. 

It will be shipped in batches so orders will be completed based on colour.

NEMO DECOMMISSION 2

NEMO has completed QC and packing and is currently on the way over to our warehouse!

KEYCAPS

Keycaps sold directly through our web store have begun shipping. This includes:

• Ishtar

• Cyberspace

• WAVE SEQ2 Br 

• WAVE SEQ2 SS - RWxNK

Project Updates - Late February 2021

M65-B

Fulfilment of the non-ICED M65-B orders is very close to complete, with a handful still to go out.

We’re expecting to finish the remainder by the end of this week.

IN-STOCK MILK THERMAL

Once M65-B fulfilment is finished, we will move on to shipping the MILK THERMALs from the in-stock raffle sale held earlier on the 12th of February. This will begin on the 1st of March at the latest.

ZENITH

Almost all of the ZENITH units have completed machining and polishing and are scheduled to progress into the anodising stage after our manufacturer returns from the LNY holidays i.e. today!

KARA

Our manufacturer has informed us that, due to LNY congestion at the port, the shipment of KARAs did not leave as scheduled. Instead, it is now booked to leave on the 25th of February.

NEMO DECOMMISSION 2

NEMO is all finished up now and is just getting his unique serial numbers etched before packing!

M60-A OLIVIA/LNY20 + M65-B ICED + M50-A + JULES

No new information for the above keyboards currently. Please see the previous update. Docking ETAs etc. will be posted once we receive them.

Project Updates - Late January 2021

THERMAL

Thanks to the hard work of our fulfilment team over last week (with multiple 30°C+ (86°F) days!), we have now finalised the majority of THERMAL orders. The remainder (<50) will be going out this upcoming week.

We have a full build video up here: https://www.youtube.com/watch?v=Z_4-0AurV2I

M65-B

The M65-B orders will also begin shipping later this week. 

The ICED units have finished and are in QC and being packed at our manufacturer as we speak.

The container for this shipment is being arranged currently. We’ll update again once we have a scheduled docking date!

M60-A OLIVIA/LNY20

The M60-A OLIVIA and LNY20 editions have completed QC and are being packed currently. They will be shipped alongside the M65-B ICED units.

M50-A

The M50-A units have completed QC and will begin being packed once the packaging boxes arrive from our other supplier.

JULES

JULES is currently still in anodising and QC. 

NEMO DECOMMISSION 2

NEMO is in surface treatment at the moment. We want to make sure NEMO’s face and body is nice and protected!

KARA

KARA has completed moulding and is now progressing into the assembly stage.

Some components are in short-supply at the moment, so we are waiting on the PCBs to complete.

KATE KEYCAPS

The tooling for the KATE keycaps is currently underway. We do expect this to take some time with Lunar New Year on the horizon.

IN-STOCK AND REPLACEMENT ITEMS

As we settle into the new warehouse and are able to physically access stock again, customers that have purchased in-stock items and/or have orders for replacement items can expect them to begin shipping later this week!

We appreciate everyone’s patience and understanding with the move 💛

THERMAL + M65-B + Final days for KARA

THERMAL + M65-B

After being delayed further up the coast, we can finally confirm that the container is landing in Melbourne today. As soon as they clear customs and we receive the units, we’re prepared and they’ll be processed immediately for shipping.

M60-A OLIVIA + LNY20

The M60-A units are now in final assembly to be prepped and packed for shipping!

KARA

There are now less than 8 days left to pre-order KARA, our first injection-moulded keyboard. If you haven’t already, check out the reviews and our typing videos:

Apiary Keyboards

alexotos

Manofinterests

LightningKeyboards

Oziii Obsessions

Rockleena

Taekeyboards

TaehaTypes

Typing videos

As always, we thank you for your continued patience and hope everyone is staying safe and having a happy holidays 💛

Project Updates - December 2020

KARA

The KARA review units have now been sent out and should make their way into your favourite reviewers’ hands as soon as possible!

You can check out the build video here: rama.link/karabuild

KATE Keycaps

We’re anticipating to have KATE keycap prototypes towards the start of next year. We really look forward to sending these out to reviewers and are hoping they love them as much as we do 🥰

THERMAL + M65-B

The container of the remaining THERMAL and M65-B units is scheduled to be docking in the next few days! Our fingers are crossed for a fast customs clearance process 🤞

However, given the busy time of the year and the continual delays at all ports in Australia this year due to the pandemic, we are expecting it to take some time.

The M65-B ICED units are taking some extra time as the process for the frosted finish requires additional processing — they will be shipped as soon as they’re finished!

If you have an order for an outstanding THERMAL or an M65-B, please make sure your address is up to date! You can view your orders by logging in on our store. If you need to update your address, please: reply to you order confirmation, email us at support@rama.works, or submit a ticket at our support portal to change it (remember to quote your order number!).

The cut-off for this is the 18th of December.

M50-A

The M50-A units are currently progressing through QC and inspection. Once cleared, they’ll be next up for shipping to our warehouse.

M60-A OLIVIA/LNY2020

The M60-A OLIVIA and LNY20 EDITIONS are also progressing through QC and inspection, with some units still anodising. We’re expecting to be able to get them shipped together with M50-A.

Jules

Jules is very close behind with anodising well underway and moving onto QC and inspection as well.

Zenith

Zenith is well into the machining stage currently!

Canvas 2

Almost all of the Canvas 2 deskmat orders that are shippable (i.e. ordered by themselves or with in-stock items) have been shipped now! If your order hasn’t shipped, please get in contact with us.

We will be looking to offer extras as in-stock once we stock take them :)

TRAY

The TRAYs have just arrived and will be processed in the next couple of weeks for shipping!

GRID KEYCAPS

The NOCT GRID keycaps stock has been exhausted and they are currently on backorder. Extras have also been ordered!

U80-A Replacement ROSE bottom weights

For the people affected by the U80-A ROSE Bottom Weight issue, almost all of the replacements have been made now and are being shipped over to our warehouse in small batches currently. Once your replacement ships, you will receive a shipping confirmation.

We want to thank everyone for their understanding and patience regarding this issue! 💛

Heavy industry Spacebar

KBDfans/ePBT are currently producing remoulded spacebars that fix the sticking issue some Heavy Industry sets experience. If you are affected by this issue, please contact us if you haven’t done so already!

NEMO DECOMmission 2 + RW01 NIGHT EDITION

NEMO Decommission 2 and the RW01 NIGHT EDITION car are currently in machining and expected to complete by the end of this month. They’ll then move on to anodisation!

U80-A SEQ2

Pre-production for U80-A SEQ2 is well underway - We’re waiting on ordered material and will begin machining soon.

CHESS SET

We’re working on the latest revisions of our upcoming chess set. We’re super excited and can’t wait to show more ♟

We're moving! + M65/M60/M50/THERMAL/TRAY/CANVAS

As of this week, we have secured a new warehousing and office facility! Currently, fulfilment is operating out of shared premises, so this new facility will help us improve our efficiency by providing much needed additional space.

Once the move is complete, support and fulfilment will happen in a centralised location, allowing support requests/tickets to directly liaise with warehousing as required. Design will still operate from our main office.

For now, our old facility will still fulfil orders as we begin to migrate everything across. Due to the extent of set up and organisation required for moving to the new location, the fulfilment of in-stock items may experience some delays. However, we will work to get through it as quickly as possible. Thank you for your understanding and patience!

THERMAL + M65-B

We know many of you are keen to hear some updates for the remaining THERMAL units and M65-B.

There were some delays due to a supply issue with the packaging but this has since been rectified. The good news is they’re now packed, ready to go and the container to ship them over has been booked! Shipping is scheduled for next week and should take approximately 2-3 weeks to arrive in port.

Accounting for time spent clearing customs and additional logistics, we can expect to receive them by early December. Once arrived, they’ll be processed immediately for fulfilment!

M60-A OLIVIA/LNY20 + M50-A

The M60-A OLIVIA and LNY20 editions plus the M50-A are close behind! Once we have more specific information, we’ll make a new blog post 😊

CANVAS

The CANVAS 2 deskmats have finished packaging and are scheduled to arrive in port on the 15th of November. There are still ongoing delays at all major ports so we’re expecting at least another week or two past this date before we receive them at our warehouse. Tentatively, fulfilment could begin around late November/early December at this stage.

TRAY

The TRAYs have finished up surface treatment, so we may be able to squeeze them onto the next shipment as well — we will confirm in a later blog post!

Manufacturing and updates

While we’re here, we’d like to take this opportunity to elaborate on the manufacturing process and how it can be very difficult to give updates, such as definitively communicating that x keyboard is in y stage and will complete on z date.

Each stage of the manufacturing process is not discrete, every single unit of x keyboard is not machined first and then moved onto the next stage. For example, throughout the manufacturing lifecycle of a product, 70% of the units could still be in the machining stage, while the 30% that have already completed machining will have moved onto surface treatment and so on and so forth.

To further complicate matters, any particular unit can also move backwards in the manufacturing process. For example, if a lighter colour anodisation does not meet our QC standards, it will be re-anodised to a darker colour or e-coated.

Sometimes, we’re also working with partial and/or periodic information from our manufacturer, especially during holiday/vacation periods. We do our best to predict and extrapolate that information into tangible updates!

We’re also happy to announce that we have added another stage of QC to our post-production process. Having 2 separate stages of QC means we can more consistently ensure our high-quality standards are met and further reduce the chance of any blemished units slipping through. Additionally, we’re expanding our machining facilities again, with 20 more machines! Moving forward, this will mean faster project timelines, which will enable greater capacity to handle multiple projects and/or large quantities simultaneously.

Support

As the volume of support tickets increase, we’ve onboarded additional staff to increase our support capacity. It’s super important to us to be able to solve any issues that arise in a timely manner, as recently, our response times have been longer than we’d like. That said, we are still a small team, so as always, your patience is appreciated! 💛

Likewise, starting today, we’ll be closing our Instagram DMs. The business suite/tools provided by Facebook for Instagram DMs are horrendously unreliable. Search is finicky and accidentally losing track of a message chain has happened far too often.

While we love chatting about what new switches you’re excited to try in your M60-A and what keyset you’re matching with your U80-A, closing the DMs will allow us to better focus and track support requests with made-for-purpose software that also connects to our online store. Similar benefits were experienced after closing our Facebook messages.

Please continue to tag us @ramaworks in posts and stories as we love seeing how everyone makes their keyboard their own!

For any issues, questions, order adjustments, or concerns in general, please lodge a ticket through: https://support.rama.care

Sending an email through to support@rama.care or replying to your order confirmation email is also completely fine!

Project Updates - September 2020

THERMAL

The THERMAL units have arrived at our warehouse. Preparation for shipping begins this Monday! There will be extras once all of the pre-orders are shipped.

U80-A SEQ1 EXTRAS

Fulfilment for SEQ1 is more or less complete! We’ll be performing a stock count on Monday to confirm the numbers. Expect to see the sale shortly after - date and time will be announced!

JULES

Jules is now heavily in the machining stage - they’re expected to complete by the end of October/early November currently.

M65-B

M65-B is currently being packaged at the factory - they’ll be shipped to our warehouse once complete. The PCBs are due to be complete at the end of the month and sent to us for early October arrival. The MUTE mounts have already arrived at our warehouse.

M60-A LNY/OLIVIA

Similar to Jules, these are heavily in machining, they’re expected to complete by the end of October/early November.

M50-A + GRID SET B Keycaps

The M50-A units are also in machining currently and are expected to complete by the end of October/early November. The GRID SET B Keycaps are in stock and ready to ship.
KEYCAPS STORE

ZENITH

Production has officially begun for Zenith and they’re currently in the early stages of machining.

CANVAS

The Canvas deskmats are scheduled to ship from our manufacturer to our box supplier at the end of the month for packing - then shipped to our warehouse for fulfilment. Expect another month for sea-freight.

TRAY

The TRAYs are currently in production. We’ll post a further update once we receive an ETA from our manufacturer. UPDATE: Expected to complete around the end of October/Early November.

KATE

The double-shot mould production for the KATE keycaps has begun! We've finalised the placement of the legends for the tooling and progress is being made! We're working on the packaging in the meantime and can't wait to show more.

KARA

The surface finish is now being added to the mould and the master colour batches are being mixed to our specified colours. We are expecting to receive these in the following weeks. Once these are inspected, tested and signed off - we can begin the pre-order! We were really hoping KARA would be ready by the end of this month but as we mentioned in previous updates, we want to get this product exactly right as it’s our favourite to date - we cannot wait for people to try these out for themselves! We’re working on a line of accessories for the KARA series as well.

NEMO Decommission 2

The pre-order for NEMO Decommission 2 closes on the 30th of September. Production will start immediately afterwards.
NEMO PRE-ORDER

COLLABORATION CAPS

We've added the new RWxNK WAVE SEQ2 cap to our store! This cap is machined from Stainless Steel and features a unique chromatic Blue/Purple PVD. This coating is tough to produce as it requires multiple PVD coatings to achieve the multi-colour finish.
KEYCAPS STORE

FOUNDRY (THERMAL + JULES) / U80-A REMAINDER / M65 / M60 EDITIONS / M50 Updates

FOUNDRY THERMAL + U80-A REMAINDER

The container for the THERMAL and remaining U80-A’s are scheduled to dock at port on the 9th of September! It will take some time to clear the goods and unpack then get to our warehouse - we’re hoping by the week after or so. We’ll post an update when they arrive and ship everything out promptly! The U80-A’s are ready to be packed as soon as they arrive in our warehouse. Once the remaining U80-A’s are shipped, we can inventory and offer the extra’s up for purchase, we’ll post a date when they will be available when we know!

M65-B / M60 EDITIONS

These are in the final stages of production; we expect that we may be able to have them freighted to our warehouse by the end of this month! Will post updates closer to the date.

FOUNDRY JULES

The JULES keyboard is heavily in the machining stage with some of the units completed - they are being stockpiled and will go off to surface finishing once they’re all machined.

M50-A

The M50-A units are currently in anodising, with the rest awaiting powder coating!

KATE Keyset

We’ve added a preview site for our upcoming doubleshot keyset at: rama.works/kate-preview

GRID SEQ2 Caps / M65-B / M60-A Olivia+LNY / M6-C YOLK + More

GRID SEQ2 Keycaps

We’ve received the colour samples for the SEQ2 release of the GRID caps, we’re happy with how the colour has come out and are continuing with the manufacturing run, we expect to ship the caps next month.

M65-B

M65-B are all in anodising (Aluminium Editions) and PVD coating now (TANK Edition) - we expect the units to be finished at the end of this month and the Polycarbonate units shortly after. These are all in the final stages, and we hope to have them packaged next month and sea-freighted off to our warehouse for final packing and shipping.

M60-A Olivia / LNY

Both M60 editions have finished machining and are currently being polished before the next stages of post-processing.

M6-C YOLK

The remainder of the M6-C YOLK editions will be finished by the middle of this month, and we can expect to receive them by the end of the month for shipping

U80-A Remaining units / THERMAL

The shipping container is ordered, and these are all being packed and will be off to Australia shortly.

ZENITH

Our most recent Foundry offering, ZENITH, has concluded pre-orders. Any extra allocated stock units will be available through our store until sold-out. We expect machining alone to take around 4-6 months.

Australian Warehouse - STAGE 4 Restrictions

As of last week, Melbourne was placed into Stage 4 lockdown, and only some businesses can operate under these newly introduced restrictions. RAMA WORKS is within the approved companies and will continue to operate and ship during this time. However we will be working at a reduced capacity until we write-out Worker Permits for our temporary packing staff - we are sorting this out as soon as possible. Our main priority is keeping our workers safe and operating within the Government guidelines.

CANVAS 2 / XL

The CANVAS is back open again for pre-order, this way we can supply the demand of the units. The pre-order will close on the 15th of August. At that point, we will then begin production

M10-C

The M10’s are shipping!! Excited to see these out 😁

COLLABORATION CAPS

For the first time, we have some Collaboration Keycaps available through our web store. They are also available alongside the keysets through the respective distributor sites.

M65/M60 EDITIONS/THERMAL

U80-A
Has arrived in the port of Melbourne and is in customs clearance, we should expect to receive it soon in our warehouse - will post an update once it does!

M65-B

Aluminium units have finished machining and are in polishing. After this they will go onto further surface treatment and anodising.

M60 EDITIONS (Olivia / LNY)

Machining will finish in July then go through surface treatment and anodising

THERMAL

Thermal will be shipped with the remaining batch of U80-A units

KARA

We have something VERY exciting for KARA coming up, we cannot wait to reveal.

M50-A Assembly/Typing Video + Extended / M65-B / GRID Caps / FILM / CANVAS

M50-A

We’ve extended the M50-A pre-order period to the 30th of this month, we’ve also created a quick video showcasing it! Unfortunately, with our move, we didn’t have everything we needed. But, either way - we hope you like the look of the board, we’re incredibly happy with the feel and size of it!

We’ve also extended the GRID keycaps to the end of the month as well. The CANVAS XL are now being packed and shipped along with the FILM accessories + NEMO. M6 Milkshake will also be shipping out to the distributors shortly!

M65-B

The machining has completed for the Aluminium variants of the M65-B! We expect to freight the Aluminium units next month and the polycarbonate ones later (will update as we are closer to the date).

M60-A EDITIONS

We’ll be posting updates of the M60 EDITIONS (LNY / OLIVIA) soon, please stay tuned!

KARA

We’re super excited to show this as it comes together, aiming to show something late next month.

M60-A SEQ2 Extras (+U80/M65/OLIVIA/THERMAL) / Tub

Extras!

Missed out on the M60-A Olivia Edition? M65-B? U80-A? THERMAL? You can fill out the form below for any stock allocations which become available. Invoices are emailed if any allocation opens up!

rama.link/extras

The M60-A SEQ2 Extras will open at 6:00 PM PST TUESDAY 11th February 2020
All colours will be available in very limited supply.

RAMA WORKS® Tub

Who would be interested in a RAMA WORKS® Tub? We’re considering launching a new product for general storage, in 3 varying sizes. Slightly translucent to see if the Tub is filled or not. This will be one of our first products from our RAMA WORKS HOLDINGS (RWH) division.

Download wallpapers like the one above here: files.rama.supply/b/Btx7WuX11bgVddVkX7fc

NEMO / LNY & MORE

NEMO Packaging

The NEMO’s have completed machining and are in the final stages of surface finishing. The packaging has also arrived in our warehouse. We’re also working on extra inclusions to include with each order! The first batch release of NEMO is super important to us and we’re honoured to see these in peoples collections soon.

U80-A / THERMAL

We’ll have updates on the U80 and THERMAL after Chinese New Year, in a few weeks!

M60-A LNY Edition

Following the short-run limited release of the M60-A OLIVIA Edition, we've introduced the M60-A LNY Edition. Featuring a bold RACE Anodised aluminium enclosure with the double-happiness enamel filled Brass backweight.

Backweights from all editions/releases of our M60 are backwards compatible.

Each LNY edition order comes with a RAMA WORKS® Red Pocket and LNY Sticker set

M10-C

The M10 is BACK! This time it will be manufactured and solely sold through RAMA WORKS®. The PCB is backwards compatible with previous revisions and now features RGB LEDs and comes in hot-swap and solderable variants.

M6-C

Our collaboration with Render Weekly is now available to preorder. Featuring design elements put together by the winner, @nachcastillo.designs.

Wallpapers!

We've curated some of our recent images into downloadable wallpapers, follow the link below to download them. We'll expand and add to these as time goes on, and also add some more from our archives.