Project Updates - June 2022

As we wait for products to arrive at our warehouse, we have been working on some items which will be included with our upcoming releases:

Microfiber Gloves:

Cleaning Cloths:

And some new products:
Playing Cards

WORK IN PROGRESS. Featuring holographic, foil and other premium features.

NFC Access Control Cards: 

We needed some elite access control cards for our office, so we decided to make our own! They’re stainless steel, weighing in at 25g and 0.8mm thick. There’s a deep-etched circular center on one side where the RFID chip sits, allowing us to not use the typical plastic lamination for one side of the card and have it remain full metal. They are laser etched, painted and have a lot of detail. These will first be available in stock alongside some of the other items arriving next month: The XO Team cap, XO Pens.

Collaboration Artisan Keycaps: 

We’ve received another batch of our collaboration caps which are currently being QC'd and packed by our warehousing team as quickly as possible to our distributors. For those who have purchased directly from us, please contact us through support@rama.works if you have moved/changed addresses and our team will be happy to assist as best we can.

XO Pens 

After initial QC we have opted to refinish the brass units of the XO PENS. We are expecting them to arrive by the end of this month leading up to the start of next month.
UPDATE: The first batch is inbound to our warehouse (the brass ones are being re-finished as we wernt’t satisfied with the finish of the brass units)

Chess Set: 

The first revision of the packaging came in which we are really happy with. It feels like a solid showcase piece you would want to keep on a coffee table. There have been some minor adjustments made and the second set of samples are en route.

JARS: 

We were expecting to receive the JARS last week, but the manufacturer has informed us of an issue with the rubber seals. The new gasket tooling will be finished by next week and the JARS will ship out that same week. We will post updates when this has been shipped through our socials e.g. Instagram, so please be sure to follow us if you haven’t already.
UPDATE: These are inbound to our warehouse.

60%/65% PCB's: 

The latest round of PCBs have arrived and we are currently performing further evaluation and testing. We are also remolding the PE Foam to adjust the sound signature and adding additional cutouts for the stabilisers.

THERMAL 

The SEQ 2 THERMAL units are in the final stages of assembly and packaging at the factory and will soon move to complete the assembly/packing of the THERMAL+ units. We will create another update when these are done and ready for sea-freight.

M60-B, M65-C, U80-B:

At this stage we’re looking at next year for fulfillment, we will keep updated if this is pushed forward.

KARA:

Pending the completion of the updated PCB’s we expect we can have the units completed soon after.

MATS: (IN PRODUCTION)

Packaging production is underway and when complete, will be assembled and shipped to our warehouse for fulfillment. We are expecting these to arrive in 2 months.

LOVE MATS DONATION:

Proceeds of our LOVE Mat edition MATS will be donated to Beyond Blue. Every month, thousands of people reach out to Beyond Blue for advice, support and information. Your donations go directly towards funding Beyond Blue’s Support Service so these calls don’t go unanswered. By supporting Beyond Blue, we are joining a community that is working to reduce the stigma, prejudice and discrimination that act as barriers to people reaching out for support. 

Doubleshot Keycaps  (KATE/CAPS):

The latest round of fine tuned samples have arrived and there are still very minor inconsistencies. We were still not 100% happy with the quality and again, Injection Molding is an iterative process - tooling after tooling changes until the end result is what’s expected. We are expecting to receive another batch soon, and will post pictures when they’re in.

INSTAGRAM 80K GIVEAWAY
We’ll be soon announcing a giveaway for reaching 80K followers, with a few exciting prizes!

🎁

U80

🎁

NEMO

🎁

MORE

🎁 U80 🎁 NEMO 🎁 MORE

Project Updates - April 2022

RAMA WORKS has invested our time and resources to continuously improve and bring the best quality products to our customers. Although we have constantly been trying our best to push all the products out on our end, we are unfortunately stuck with limitations. The Global Covid Pandemic has caused more delays this year, with businesses and logistics being completely shut, then reopening with reduced capacity causing a backlog. Understandably we know this is frustrating. However, we will continue to do our best and keep everything moving and work out ways to avoid this in the future.

Our team has been working on new and exciting ideas, which we want to source and produce locally to avoid any further halts to production due to the pandemic while supporting local businesses. So stay tuned to the magic our team has been working on!

Doubleshot Keycaps:
After receiving the last batch of samples a few weeks ago, we were not 100% happy with the quality. We made some adjustments to the doubleshot tooling, which is more involved due to the material shrinkage and material flow between the legends. The samples with the new adjustments will arrive soon, and we are confident they will meet our high-quality standards and proceed with production.

We’re also adjusting the case to have an extended internal hinge - we’ve received the updated sample of this and are happy with it, and it is what will be utilised for the end product.

Jar: Production nearly completed
After adjusting the top lid mould to increase the draft angle by 2 degrees to apply a heavier texture finish to improve the grip, we have also opted for a translucent finish for better wear, which would hide any visible scratches over time. Hopefully, if there are no further logistical delays due to covid restrictions with the supply chain, we should be on track to get these out in the next month as they are currently being all moulded.

For any further clarifications on your JARS order, please do not hesitate to get in contact with us at support@rama.work

Here’s how the finish is changing:

---

M6-C:

The M6-C PCB’s have finally arrived at our warehouse and are going through a rigourous quality check. We have the M6-C Dandy enclosures and GRID caps in our Melbourne Warehouse and will be ready to ship these shortly. We expect the remainder of the M6-C enclosures to be completed in 1-3 months. We’ll also make available in stock the new GRID colours we made for these.

RW KEYBOARD BUILD - SNAP AND WIN A U80 ⌨️ 😍 📸

Have you built your own RAMA WORKS Keyboard and want to add a U80 to your collection?!  💛 ⌨️ 🎁  

All you need to do is take a creative photo of your own RAMA WORKS Keyboard Build and share it on either Instagram, Facebook or Twitter & tag @ramaworks  including the hashtag #RWxMyKeyboardBuild. 

 The winning photo will be re-shared on all our social platforms 🥳

Our support team will get in contact with the winners via the information provided to organise your prize - we will do our best to provide the preferred colour keyboard to the winners - subject to availability ⌨️💛

👇Enter👇
Photo Competition Entry

Things to come:

👀

Global Updates:

Our manufacturing partners in Shenzhen / Shanghai have been placed under strict lockdown to curb the current COVID outbreak. This means that the global supply chain across all sectors will be disrupted for the foreseeable future. We are closely monitoring the situation and will continue to do our best under circumstances out of control. Thank you to all our loyal ongoing clients for their patients during these difficult times. We understand the delays can be frustrating, and in the ideal setting with no supply chain issues, we would be able to get the products to you in a timely manner. The past year has shown us how quickly things can change, so we are also adapting our Business by looking at new products we can source locally to avoid these issues and continue providing high-quality products.

Other Updates:

Timelines from the previous March update on our other products are still valid.

Project Updates - March 2022

We at RAMA WORKS place quality and care at our highest priority; we want to deliver a product we’re proud of.

Doubleshot Keycaps:
Two weeks ago, we received the latest batch of sample caps from the mould, and we’re still not completely satisfied with the legends on the modifier caps - we’ve outlined the changes we require and expect the next round of samples to arrive in 2-3 weeks or so. Again, Injection Molding is an iterative process - tooling after tooling changes until the end result is what’s expected. Doubleshot tooling is a bit more involved as the material shrinkage, and material flow between the legend and the casing needs to be accounted for. We’re confident that the keycaps will be completed relatively quickly once we receive samples we’re happy with. Of course, this is taking longer than expected, but we want what will be received by our customers to be what we expect.

We’re also adjusting the case to have an extended internal hinge - we’ve received the updated sample of this and are happy with it, and it is what will be utilised for the end product.

Jar:
These are almost production-ready; the top lid mould is being adjusted to increase the draft angle by 2 degrees to apply a heavier texture finish. The current texture does not have enough grip.

Here’s how the profile’s changing:

We can expect the production to complete in around 1-2 months.

THERMAL SEQ2 / THERMAL+:

We are expecting these to arrive in 2-4 months. We will have a fair amount of extra units available for these.

Pen:

Enclosures are done, and the included pen ink has been secured - we’re finalising the packaging. We should receive these in 1-2 months. We’ll also have extra’s available when they arrive and the original orders are shipped.

M6-C:

The M6-C PCB’s will be arriving in a month. We have the M6-C Dandy enclosures and GRID caps in our Melbourne Warehouse and will be ready to ship once the PCBs arrive. We expect the remainder of the M6-C enclosures to be completed in 1-3 months. We’ll also make available in-stock the new GRID colours we made for these.

Chess Set:

2-4 months until complete

KARA / M60-B / M65-C:

We’ve received the samples of the updated PCBs and are currently testing them before putting them into production. We’ve tested them in the KARA and M65 with ICED plates, and they feel really great; it provides a lot more dampening/give with the typing experience.

Metal Keycaps:

We are aiming to complete all outstanding keycaps within 1-4 months.

U80-A SEQ 2 Extras / Trays:
Being packed and going out ASAP!

Things to come:

BAT:

The moulded BATs are production-ready. We can’t wait for people to feel the quality and weight of these!

Jumpsuit:

These are production-ready and will launching alongside the BAT at a later date

Global Updates:

Our manufacturing partners in Shenzhen / Shanghai have been placed under strict lockdown in a bid to curb the current COVID outbreak. This means that the global supply chain across all sectors will be disrupted for the foreseeable future. We are closely monitoring the situation and the current advice is that the lockdown should lift by next Monday, 21 March.

PROJECT UPDATES - MID-JANUARY 2022 + LNY GIVEAWAY

To celebrate the Year of the Tiger, we want to share a little love with a festive keyboard. We looked deep into our archives and found a rare piece to give to one lucky winner for free !!!

Yes, you heard that right 😍👏

PRIZES:

1 x M60-A LNY20 Edition in RACE (Red Aluminium) with GOLD (Brass) Backweight. Valued at USD 360 and the LAST unit in existence.

3 x INVENTORY 2 LNY20 (Red Aluminium). Valued at USD 59 each.

TO ENTER

✔️Follow @ramaworks

✔️Tag a friend to share the love

✔️Tell us your New Year's resolution

It's as simple as that 😀

A winner will be drawn at random on January 31st from all eligible entrants and notified via DM for your details. Another three valid entrants will be randomly selected for the LNY inventory wallets.

Good luck everyone 🐯🧧🧨
Enter Now

---

PROJECT UPDATES

We are wishing everyone a Happy New Year! The team here at RAMA WORKS is excited to start fresh and work away at new projects.

The Chinese New Year will fall on Tuesday, February 1st, 2022, starting the Year of the Tiger. Celebrations traditionally last for 3-4 weeks and will result in a halt in manufacturing during the holiday; however, we have many products arriving before this, which our Melbourne warehouse will continue to operate for fulfilment.

Here are the updates for our current projects:

U80-A SEQ2

STATUS: FULFILMENT IN PROGRESS

We have been working around the clock to ensure that you all receive your U80-A SEQ 2 after the long wait. We know this project has taken some time, and we thank you all for patiently waiting and being understanding of the current circumstances. We hope you enjoy your U80-A and make sure to take a snap of your build and tag @ramaworks so we can see your creation!

Please make sure your shipping address is up to date! You can check by logging in at https://ramaworks.store/account/login and navigating to your order. 

Note: Changing your default address will not update past orders.

If you need to correct your shipping address, please get in touch with us at support@rama.works or https://support.rama.care/

Remember to include your order number!

M60-B

STATUS: PRE-ORDER OPEN 

The famed M60 silhouette returns with newly updated internals with the removal of the integrated plate in favour of the gasket mounted sub-assembly. Keeping its aesthetic beauty from its predecessor, first released in 2018, the M60-B has been re-engineered & designed to provide a modern typing experience with added compatibility with our KARA range. Pre-order closes on January 31st. 

You can purchase the refreshed design with new innovative features using the link below: 

https://ramaworks.store/products/m60-b 

THERMAL SEQ2/THERMAL+

STATUS: IN PRODUCTION

PCB manufacturing will start in late February after the Chinese New Year festive period. Customer orders are expected to begin fulfilling in late Q2 2022. We will keep everyone updated as soon as we have more information on the PCBs completion and arrival at our warehouse.

CAPS/KATE KEYSETS 

STATUS: PRE-ORDER CLOSED - PRE-PRODUCTION COMMENCED 

We are finalising the legends and working on adjusting the casing tooling. Shipping will begin when manufacturing/assembly is complete. 

M65-C 

STATUS: PRE-ORDER CLOSED - PRE-PRODUCTION COMMENCED 

The preorder period for M65-C is closed now, and production will commence shortly! Shipping will start when manufacturing/assembly is complete. Estimated fulfilment: Q4 2022

RAMA'S BURGERS T-SHIRT / INVENTORY 2 / KEYCAP

STATUS: FULFILMENT ABOUT TO COMMENCE 

After receiving some inventory for the RAMA's Burger collection, we were hopeful the remaining would have arrived in December. Unfortunately, that was not the case due to a backlog in shipping and covid cases halting daily limits of shipments and delays, which were out of our control. 

The good news…. 

We will have all the inventory shipped to us before Chinese New Year, so our warehouse will fulfil orders as soon as they arrive in Melbourne! 

Please make sure your shipping address is correct! You can check by logging in at https://ramaworks.store/account/login and navigating to your order. 

Note: Updating your default address will not update past orders.

If you need to update your shipping address, please get in touch with us at support@rama.works or https://support.rama.care/.

Remember to include your order number!

CHESS SET 01 

STATUS: IN PRODUCTION

CHESS PIECES:

After careful consideration, we have opted to proceed with a more classical chess set look (white and black) with ceramic coating for durability and a superior finish. We have also installed silicone feet on the pieces to protect the board's surface and prevent slipping. 

BOARD

The board features a thick 14mm acrylic base, with silkscreen graphics on the underside - encasing it below the crystal housing. The design of the board has remained essentially the same.

We always aim to provide the most pleasing end-user experience hence the change in finishing for the pieces. If you have any concerns or queries regarding your order, don't hesitate to get in touch with us at support@rama.works or: https://support.rama.care/.

XO PEN 

STATUS: PRODUCTION NEARLY FINISHED 

We will be receiving the XO PENS next month! Fulfilment of orders will begin when stock arrives at our Melbourne Distribution Center. 

TRAY

STATUS: PRODUCTION COMPLETED - FULFILLMENT ABOUT TO COMMENCE  

The TRAYS will be arriving this month so our warehouse can fulfil customer orders as soon as they arrive. 

JARS

STATUS: PRE-PRODUCTION 

The preorder period for the JARS has ended. Pre-production is currently underway. 

KARA SEQ2

STATUS: IN PRODUCTION

Production for the encasements is underway. We have changed the PCB design to add the flex cuts with the prototype arriving after Chinese New Year. Production on the new, improved design of the PCB can begin shortly after. We will keep everyone updated as soon as we have more information on when fulfilment can commence. 

BAT

STATUS: Pre-Production

The latest off-tool samples have come out of the moulds with their final texture finish and are inbound to our HQ. We can't wait to show the pre-production samples when they land!

Project Updates - Mid December 2021

The team here at RAMA WORKS have been very dedicated to getting our orders and updates on track, doing what we love and producing top quality products. Thank you to all our loyal customers for being patient and for everyone’s support. Here are the following updates for our current projects. We have also been working away on some exciting new projects to come next year!

ZENITH

STATUS: FINISHED FULFILMENT 

Our warehouse staff worked extremely hard to finish fulfilling all your orders. We hope all our customers are enjoying their brand new ZENITH. Make sure you share photos so we can see how yours have turned out! Tag @ramaworks on Instagram so we can reshare 🤗

If you have a support related inquiry, please contact us at support@rama.works or https://support.rama.care/

Remember to include your order number!

U80-A SEQ2

STATUS: FULFILMENT ABOUT TO COMMENCE 

PCB:

The PCBs are finally on their way to our warehouse as we speak! Fulfilment can commence as soon as they arrive at our Melbourne distribution centre. The warehouse team has been very busy organising in preparation for the final components to arrive so we can get all your orders out the door as soon as they land. 

ENCASEMENT:

Encasements, U80 backplates, and internal weights are at our warehouse, awaiting the remaining PCB’s to begin the fulfilment of our orders. 

We have been working around the clock to ensure that we can get these U-80-A SEQ 2 to all our customers after the long wait as soon as we receive all the necessary parts. We know this project has taken some time, and we thank you all for patiently waiting and being understanding of the current circumstances. 

THERMAL SEQ2/THERMAL+

STATUS: IN PRODUCTION

Thermal SEQ2 and Thermal+  encasement are now complete after the desired rose-gold colour has been rectified. These should hopefully be shipped off soon to our warehouse and awaiting other components to fulfil our customer orders expected late Q1 2022. We will keep everyone updated as soon as we have more information.

CAPS KEYSETS 

STATUS: FINAL DAY TO PREORDER

By popular demand and with a bit of help from our manufacturing partners, we are proud to offer this product at a lower price point (excluding CASE). We have made some adjustments to the tooling (Currently at Off-Tool Samples 3 [T3]) and are now finalising the double-shot legends, but overall are very happy - production will be relatively quick when the tooling is complete. Rest assured, the CAPS will be of the high-quality standard and aesthetic of RAMA WORKS® and we are super excited to hear and see these on whichever board they crown!

See below photos of the latest tooled samples:

M65-C 

STATUS: PRE-ORDER CLOSED - PRE-PRODUCTION COMMENCED 

The preorder period for M65-C is closed now, and production will commence shortly! Shipping will start when manufacturing/assembly is complete. Estimated fulfilment: start of Q3 2022

RAMA’S BURGERS T-SHIRT / INVENTORY 2 / KEYCAP

STATUS: AWAITING TRANSIT

We have received some inventory for the RAMA’S Burgers collection. We are waiting for the rest of the inventory to arrive before fulfilment to our customers will commence. We will update everyone as soon as the rest of the products land.

CHESS SET 01 

STATUS: IN PRODUCTION

CHESS PIECES:

After careful consideration, we have opted to proceed with a more classical chess set look (white and black) with ceramic coating for durability and a superior finish. We have also installed silicone feet on the pieces to protect the board’s surface and prevent slipping. 

BOARD

The board features a thick 14mm acrylic base, with silkscreen graphics on the underside - encasing it below the crystal housing. The design of the board has remained essentially the same.

We always aim to provide the most pleasing end-user experience hence the change in finishing for the pieces. If you have any concerns or queries regarding your order, please contact us at support@rama.works or https://support.rama.care/

XO PEN 

STATUS: IN PRODUCTION

The ink refill for the XO PEN is currently being sourced.

TRAY

STATUS: IN PRODUCTION

Production will be completed by the end of the month. Fulfilment of orders will begin when the TRAY arrive at our Melbourne distribution centre. 

JARS

STATUS: PRE-PRODUCTION 

The preorder period for the JARS has ended. Pre-production is currently underway. 

KARA SEQ2

STATUS: IN PRODUCTION

RAMA WORKS® x @st_ali 🇮🇹💚☕️🤍☕️❤️🇦🇺

Status: WIP

Project Updates - Mid November 2021

We would like to sincerely apologise to all our customers for the lack of recent updates, we have been busy working away getting everything back on track to do what we love and produce top-quality products. We recently have welcomed some brand new staff to our team which has been really exciting! We also have been slowly transitioning back into the office from strict Melbourne COVID lockdown so have been thoroughly enjoying the ability to work together again. We are all very dedicated and committed to getting things running full steam ahead so we are excited for the next chapter at RAMA WORKS®. Thank you to all our loyal customers who have been waiting patiently, your support means a lot to us. 💛💛

ZENITH

STATUS: FINISHING UP FULFILMENT 

We are currently shipping out the last few orders and hope that all of our customers are enjoying their brand new ZENITH.

U80-A SEQ2

STATUS: IN PRODUCTION

PCB:

Production of U80-A SEQ2 PCBs was temporarily halted due to the global microchip shortage caused by the pandemic. We are pleased to announce we have secured the necessary supplies and production will resume shortly.

ENCASEMENT:

Our manufacturing partners are experiencing backlogs from the Golden Week holiday in China as well as reduced production capacity from the power tariff imposed by the government leading up to winter. We have received the first batch of encasements, U80 backplates, and internal weights that have arrived at our Melbourne distribution center. We are awaiting the remaining parts, and PCB’s to begin the fulfillment of our orders. 

No one would love to get these out quicker to our customers more than us, for everyone to enjoy them. We know this project has taken some time, and we thank you all for patiently waiting and being understanding of the current circumstances. We are working around the clock to make sure as soon as we receive the last few components, we can ship them off to our customers with no glitches! We are hoping to get the U80-A SEQ 2 to our customers by the end of the year, however, we will keep you all posted closer to the date with any updates we receive. 

THERMAL SEQ2/THERMAL+

STATUS: IN PRODUCTION

Thermal SEQ2 and Thermal+ are currently being anodised. We ran into some issues with attaining the desired rose-gold colour which has since been rectified.

CAPS KEYSETS 

STATUS: PRE-ORDER 

The pre-order period for CAPS is open until December 10th AEDT. By popular demand and with a little help from our manufacturing partners, we are proud to offer this product at a lower price point (excluding CASE). Rest assured, the CAPS will still be of the high-quality standard and aesthetic of RAMA WORKS®.

M65-C 

STATUS: PRE-ORDER 

The preorder period for M65-C is open until November 30th AEDT. Shipping will commence when manufacturing/assembly has been completed.

KATE KEYCAPS

STATUS: PRE-PRODUCTION

The preorder period for the KATE Keycaps has ended. Pre-production is currently underway.

RAMA’S BURGERS T-SHIRT / INVENTORY 2 / KEYCAP

STATUS: AWAITING TRANSIT

We have received some inventory this week which is exciting! The rest of the collection should be shipped to us in the next 2-4 weeks pending quality control. Once these arrive at our warehouse in Melbourne, shipment to our customers will commence. We will update everyone as soon as the rest of the products land.

CHESS SET 01 

STATUS: IN PRODUCTION

CHESS PIECES:

After careful consideration, we have opted to proceed with a more classical chess set look (white and black) with ceramic coating for durability and a superior finish. These are still made from the same aluminium, but now with a more premium ceramic coating finish. We have also installed silicone feet on the pieces to protect the board’s surface and prevent slipping. 

BOARD

The board features a thick 14mm acrylic base, with silkscreen graphics on the underside - encasing it below the crystal housing. The design of the board has remained largely the same.

We always aim to provide the finest end-user experience hence the change in finishing for the pieces. If you have any concerns or queries regarding your order please contact us at support@rama.works or https://support.rama.care/

XO PEN 

STATUS: IN PRODUCTION

The ink refill for the XO PEN is currently being sourced.

TRAY

STATUS: IN PRODUCTION

Aiming for completion by mid-December however this may be extended with the power tariff imposed by the CN Government for Winter. 

JARS

STATUS: PRE-PRODUCTION 

The preorder period for the JARS has ended. Pre-production is currently underway. 

KARA SEQ2

STATUS: IN PRODUCTION

No news for KARA SEQ2.

BAT 01

STATUS: MOULDING

We’ve created the first set of samples of the upcoming BAT and have started on creating the moulds that we can expect to have completed in 30-40 days which we cannot wait to show!

Project Updates - Mid October 2021

Sorry for the lack of updates! Many of our manufacturers were on holiday for Golden Week and we wanted to wait for the most up to date information before posting.

ZENITH

STATUS: IN TRANSIT

Zenith has finally landed in port in Melbourne! We’re currently going through the customs clearance process to get the enclosures over to our warehouse.

This is expected to take up to 2 weeks. We’ll post another update shortly before shipping to customers commences.

Please make sure your shipping address is correct! You can check by logging in at https://ramaworks.store/account/login and navigating to your Zenith order. Note: Updating your default address will not update past orders.

If you need to update your shipping address, please contact us at support@rama.works or https://support.rama.care/

Remember to include your order number!

U80-A SEQ2

STATUS: IN PRODUCTION

Production of U80-A SEQ2 PCBs was temporarily halted due to an unexpected microchip shortage for this manufacturing run.

The additional inventory arrived yesterday and production has resumed.

THERMAL SEQ2/THERMAL+

STATUS: IN PRODUCTION

Thermal SEQ2 and Thermal+ is currently in anodising.

KATE KEYCAPS

STATUS: PRE-PRODUCTION

The preorder period for the KATE Keycaps has ended. Pre-production is currently underway.

RAMA’S BURGERS T-SHIRT / INVENTORY 2 / KEYCAP

STATUS: AWAITING TRANSIT

Unfortunately, the RAMA’S BURGERS collection products didn’t make the cutoff for shipping before Golden Week due to a few logistical reasons.

They are now expected to dispatch from our manufacturer within 1-2 weeks.

CHESS SET 01 

STATUS: IN PRODUCTION

No news for CHESS SET 01.

XO PEN 

STATUS: IN PRODUCTION

The PR4F ink refill for the XO PEN is currently being sourced.

TRAY

STATUS: IN PRODUCTION

No new information for TRAY.

KARA SEQ2

STATUS: IN PRODUCTION

No news for KARA SEQ2.

---

WE’RE HIRING!

We’re looking for a Motion Graphics Designer. If this sounds like you, find out more info here: https://rama.link/joinus   

---

If you have any questions or concerns, please feel free to contact our support team by emailing support@rama.works and/or submitting a ticket at https://support.rama.care/

Project Updates - Mid September 2021

ZENITH

STATUS: IN TRANSIT

Zenith took longer than anticipated to depart port. We are expecting tracking details/ETA from our manufacturer within the next few days.

U80-A SEQ2

STATUS: IN PRODUCTION/IN TRANSIT

The U80-A SEQ2 PCBs are expected to complete production by early next week. The second and final batch of enclosures is also currently en route from our manufacturer to the RAMA WORKS warehouse.

THERMAL SEQ2/THERMAL+

STATUS: IN PRODUCTION

Tentatively, production of Thermal SEQ2 and Thermal+ is currently expected to be completed in mid-Q4.

KATE KEYCAPS

STATUS: PRE-ORDER

Only 2 weeks left to pre-order KATE Keycaps!

For more information, see here.

RAMA’S BURGERS T-SHIRT / INVENTORY 2 / KEYCAP

STATUS: IN TRANSIT

Packaging for the RAMA’S BURGERS collection is now complete and is currently en route from our manufacturer to the RAMA WORKS warehouse.

The Inventory 2 and keycap have completed manufacturing and are scheduled to ship off from our manufacturer this week.

CHESS SET 01 

STATUS: IN PRODUCTION

A number of issues were present with the initial CHESS SET 01 sample pieces. They have been addressed and we’re expecting a new set of samples within a week.

In the meantime, here’s a sneak peek at the packaging artwork!

XO PEN 

STATUS: IN PRODUCTION

XO PEN production is in progress, expected to finish mid-late Q4.

TRAY

STATUS: IN PRODUCTION

Some delays due to material sourcing were encountered for the TRAY, production is currently in progress.

KARA SEQ2

STATUS: IN PRODUCTION

Pre-order, including additional allocations, closed on September 10th. Production is now in progress.

KARA SEQ1 Extras (POSTPONED)

KARA SEQ1 Extras will be released across three different drops.

Due to the finite nature of extras, please be aware that availability is very limited.

Drop 1: Testing

Date - 21st of September 7PM PDT TBA

• To minimise units purchased by bots, we have implemented various bot preventative measures.

• The primary purpose of this drop is to test our bot protection.

• This initial drop will include a small portion of the available KARA SEQ1 extra units.

• Limit of one per customer, multiple orders will be cancelled.

• Unfortunately, due to VAT laws, UK customers are ineligible.

• No extra accessories will be available with this drop.

Drop 2: Main Drop

Date - TBA

• This drop will include the remaining majority of the KARA SEQ1 extra units.

• No extra accessories will be available with this drop.

• Further details will be provided at a later date.

Drop 3: Extra Accessories

Date - TBA

• Once customers have received KARA SEQ1 extras and all customer support issues are resolved, extra accessories will be released.

• Further details will be provided at a later date.

---

If you have any questions or concerns, please feel free to contact our support team by emailing support@rama.works and/or submitting a ticket at https://support.rama.care/

Project Updates - Late August 2021

M50-A

M50-A fulfilment is now complete.

ZENITH

We’re currently still waiting for a clear ETA for when Zenith is due to arrive in port.

U80-A SEQ2

The components for U80-A SEQ2 PCBs have been secured and production is currently underway.

THERMAL SEQ2/THERMAL+

No news for Thermal SEQ2/Thermal+.

KATE KEYCAPS

KATE Keycaps are now live and available for pre-order on the store!

For more information, see here.

RAMA’S BURGERS T-SHIRT / INVENTORY 2 / KEYCAP

No news for RAMA’s BURGERS products.

CHESS SET 01/ XO PEN / TRAY

No news for CHESS SET 01/ XO PEN / TRAY.

KARA SEQ2

KARA SEQ2 is now approaching the pre-order close at the end of the month. There’s just over a week left to grab one, don’t miss out!

---

If you have any questions or concerns, please feel free to contact our support team by emailing support@rama.works and/or submitting a ticket at https://support.rama.care/

Project Updates - Early August 2021

JULES

Jules fulfilment is now complete.

M50-A

The majority of M50-A orders have been fulfilled.

ZENITH

The shipping allocation for Zenith has finally been secured. They are expected to depart from port early this month. Once they arrive and clear customs, we’ll post another update.

U80-A SEQ2

The shipping allocation for the partial batch of U80-A SEQ2 housings has also been secured, and will be on a similar timeline to Zenith.

However, we have received news from our PCB manufacturer that the PCBs will be delayed due to chip/component shortages. We’re currently waiting for additional information before we can ascertain an updated ETA.

THERMAL SEQ2/THERMAL+

No news for Thermal SEQ2/Thermal+.

KATE KEYCAPS

Preparation for the launch of the KATE keycaps is ongoing, and we’re excited to announce that they’ll be ready for launch this month. More info to come soon!

RAMA’S BURGERS T-SHIRT / INVENTORY 2 / KEYCAP

T-SHIRT: Manufacturing completed, pending packaging

INVENTORY 2: In production

KEYCAP: In production

The current estimated shipping date is Q4 2021.

CHESS SET 01/ XO PEN / TRAY

Pre-order closed late last month. Pre-production is currently underway.

If you have any questions or concerns, please feel free to contact our support team by emailing support@rama.works and/or submitting a ticket at https://support.rama.care/

Project Updates - Mid July 2021

JULES

Most of the remade VARIABLE plates have arrived at our warehouse with the remainder to be completed in 3-4 days.

We’re aiming to complete fulfilment of solderable/VARIABLE Jules orders by late July.

KARA

The W01-A Internal Weights mentioned in the last update ended up arriving earlier than expected.

As a result, we have completed shipping all KARA orders as of the 16th of July!

M50-A

The majority of M50-A orders have also been sent out. The remainder will be fulfilled next week.

U80-A SEQ2

Due to a small miscommunication from our manufacturer, we were under the impression that the first batch of U80-A SEQ2 was on the same shipment/container as the W01-A Internal Weights, as noted in the last update.

Our manufacturer has since let us know that the U80-A units were picked up at the same time as the weights. However, due to the sheer volume of the shipment, the freight company had to arrange for them to be shipped in a separate container and consequently, on a different ship.

We’re expecting to receive more details and an updated ETA soon!

THERMAL SEQ2/THERMAL+

Pre-production (material sourcing, tooling, etc.) for Thermal SEQ2 and Thermal+ is underway. Tentatively, we’re currently expecting production to complete in late Q4.

NEMO DECOMMISSION 2 + RW01 NIGHT EDITION

Fulfilment of NEMO DECOMMISSION 2 and the RW01 NIGHT EDITION completed a couple of weeks ago.

KATE KEYCAPS

The first tool releases/samples for the KATE keycaps had some injection marks that we weren’t happy with. We’re currently reworking the tooling to move/reduce them.

We want the standard of quality to be as high as possible, so we’re really taking our time to get it right.

SNAP LOCKDOWN

Beginning on the 16th of July, Victoria, where our warehouse is located, entered a snap lockdown in order to contain a new outbreak of COVID-19.

The lockdown is currently planned to last for 5 days.

For the health and safety of our team, we are operating at a reduced capacity.

Everyone’s support and patience is, as always, greatly appreciated as we do our best to continue to ship orders while adhering to restrictions.

If you have any questions or concerns, please feel free to contact our support team by emailing support@rama.works and/or submitting a ticket at https://support.rama.care/

Project Updates - Late June 2021

JULES

At this point in time, our manufacturer has given us an ETA of early July for the remade VARIABLE plates. 

Allowing time for the plates to ship to our warehouse, fulfilment of solderable/VARIABLE plate Jules can resume in mid-late July.

The majority orders of the hotswap/FIXED plate Jules have now completed shipping.

It has come to our attention that member(s) of our support team have mistakenly informed some customers that the draft version of Jules was approved for production by its designer. 

The details of the situation were misinterpreted by our support team as the information passed through multiple people. This is not true and we apologise for any confusion caused.

KARA

Our manufacturer has informed us that the KARA production run of W01-A Internal Weights has still not left port since the 2nd of June due to ongoing issues with port availability.

The freight forwarder has even attempted to transport the container by truck to an alternative port with no success.

Currently, the shipment is expected to depart on the 26th of June and arrive by early-mid July.

Given the amount of time customers have now been waiting, we have decided to ship all KARA orders and then ship the W01-A weights separately once they have arrived.

Customers who have not yet received their KARA order can expect to receive a shipping confirmation within the next 1-2 weeks.

U80-A SEQ2

The partial batch of U80-A SEQ2 mentioned in the late May update is on the same shipment as the W01-A weights.

M50-A

Fulfilment of M50-A will begin as soon as possible alongside KARA.

ZENITH

The same port issues with W01-A/U80-A SEQ2 are also affecting Zenith. Once we have an expected shipping date, it will be posted here on the updates blog.

NEMO DECOMMISSION 2 + RW01 NIGHT EDITION

Shipment of all NEMO DECOMMISSION 2 and RW01 NIGHT EDITION orders are due to complete within the next 1-2 weeks.

RW PEN A

Project Updates - Late May 2021

ZENITH

Our manufacturer is currently finalising details for the Zenith shipment to our warehouse. Limited port availability is causing delays.

U80-A SEQ2

A partial batch of U80-A SEQ2 is currently being prepared for shipment from our manufacturer to our warehouse.

KARA

The W01-A Internal Weights for the KARA production run have been completed and are currently enroute to our warehouse.

MELBOURNE LOCKDOWN

Beginning on the 28th of May, Melbourne, where our warehouse is located, had entered an emergency lockdown due to a new outbreak of COVID-19.

The lockdown is expected to last 7-10 days and will temporarily interrupt our fulfilment team from shipping orders out.

The safety and health of our team is of utmost importance and we will return to shipping as soon as possible.

Project Updates - Early May 2021

M60-A OLIVIA/LNY20

Almost all M60-A OLIVIA and LNY20 orders have now shipped out.

There are still a small handful of OLIVIA TANK and KURO LNY20 orders (including accessory orders) that are yet to be shipped due to a miscounted/mispacked shipment from our manufacturer. 

These remaining units are already on their way to our warehouse and will be shipped as soon as they arrive.

If you have not yet received your shipping confirmation for your order, then your order is very likely part of this handful.

If you are unsure whether your order is affected, please feel free to contact us by emailing support@rama.works or submitting a ticket at https://support.rama.care/ 

JULES/M50-A

The PCBs for Jules and M50-A have been completed and are currently enroute to our warehouse.

KARA

In the meantime, KARA fulfilment is in full swing.

Our fulfilment team is hard at work every day shipping the orders out. Given the sheer volume of units, we kindly ask everyone to be patient.

To allow our support team to more quickly and efficiently reply, we will no longer be responding to emails/tickets asking for individual order ETAs. 

Rest assured, we will announce when KARA fulfilment is complete.

We have also hired extra full-time staff who will be joining us this month to help push out orders quicker!

ZENITH

Zenith is currently being organised for shipping from our manufacturer to our warehouse.

U80-A SEQ2

Unfortunately, we will not be able to begin fulfilment by mid-Q2 as originally expected. However, some of the U80-A SEQ2 units have completed manufacturing.

We’ll post an ETA once our manufacturer can provide a more accurate timeline for when the completed units can ship over to our warehouse.

IN STOCK ITEMS

Our current priority on shipping keyboards may cause some delay to shipment of in-stock items. We expect this to smooth out as we refine our shipment processes alongside the addition of new staff.

We thank everyone for their continued support and patience during this busy period!

Project Updates - Early March 2021

M65-B ICED 

The M65-B ICED units landed in dock earlier this week and are currently undergoing customs clearance. We expect to receive them by the end of this week. This shipment includes the ICED plates and bases. 

If you have an order with a non-ICED M65-B and an ICED accessory, it’ll now be ready to ship once they come in.

M60-A OLIVIA/LNY20

The M60-A units have also landed alongside the M65-B ICED units. Fulfilment will begin after M65-B completes.

M50-A + JULES

M50-A and Jules are currently still in transit via sea freight. More news will be included in the next update once we have an expectation of when they will land. 

U80-A SEQ2

We know many of you have been waiting for U80-A SEQ2 updates! 

Currently, we’re expecting to begin fulfilment by mid-Q2 and finish by early Q3. 

It will be shipped in batches so orders will be completed based on colour.

NEMO DECOMMISSION 2

NEMO has completed QC and packing and is currently on the way over to our warehouse!

KEYCAPS

Keycaps sold directly through our web store have begun shipping. This includes:

• Ishtar

• Cyberspace

• WAVE SEQ2 Br 

• WAVE SEQ2 SS - RWxNK

Project Updates - December 2020

KARA

The KARA review units have now been sent out and should make their way into your favourite reviewers’ hands as soon as possible!

You can check out the build video here: rama.link/karabuild

KATE Keycaps

We’re anticipating to have KATE keycap prototypes towards the start of next year. We really look forward to sending these out to reviewers and are hoping they love them as much as we do 🥰

THERMAL + M65-B

The container of the remaining THERMAL and M65-B units is scheduled to be docking in the next few days! Our fingers are crossed for a fast customs clearance process 🤞

However, given the busy time of the year and the continual delays at all ports in Australia this year due to the pandemic, we are expecting it to take some time.

The M65-B ICED units are taking some extra time as the process for the frosted finish requires additional processing — they will be shipped as soon as they’re finished!

If you have an order for an outstanding THERMAL or an M65-B, please make sure your address is up to date! You can view your orders by logging in on our store. If you need to update your address, please: reply to you order confirmation, email us at support@rama.works, or submit a ticket at our support portal to change it (remember to quote your order number!).

The cut-off for this is the 18th of December.

M50-A

The M50-A units are currently progressing through QC and inspection. Once cleared, they’ll be next up for shipping to our warehouse.

M60-A OLIVIA/LNY2020

The M60-A OLIVIA and LNY20 EDITIONS are also progressing through QC and inspection, with some units still anodising. We’re expecting to be able to get them shipped together with M50-A.

Jules

Jules is very close behind with anodising well underway and moving onto QC and inspection as well.

Zenith

Zenith is well into the machining stage currently!

Canvas 2

Almost all of the Canvas 2 deskmat orders that are shippable (i.e. ordered by themselves or with in-stock items) have been shipped now! If your order hasn’t shipped, please get in contact with us.

We will be looking to offer extras as in-stock once we stock take them :)

TRAY

The TRAYs have just arrived and will be processed in the next couple of weeks for shipping!

GRID KEYCAPS

The NOCT GRID keycaps stock has been exhausted and they are currently on backorder. Extras have also been ordered!

U80-A Replacement ROSE bottom weights

For the people affected by the U80-A ROSE Bottom Weight issue, almost all of the replacements have been made now and are being shipped over to our warehouse in small batches currently. Once your replacement ships, you will receive a shipping confirmation.

We want to thank everyone for their understanding and patience regarding this issue! 💛

Heavy industry Spacebar

KBDfans/ePBT are currently producing remoulded spacebars that fix the sticking issue some Heavy Industry sets experience. If you are affected by this issue, please contact us if you haven’t done so already!

NEMO DECOMmission 2 + RW01 NIGHT EDITION

NEMO Decommission 2 and the RW01 NIGHT EDITION car are currently in machining and expected to complete by the end of this month. They’ll then move on to anodisation!

U80-A SEQ2

Pre-production for U80-A SEQ2 is well underway - We’re waiting on ordered material and will begin machining soon.

CHESS SET

We’re working on the latest revisions of our upcoming chess set. We’re super excited and can’t wait to show more ♟

THERMAL + KARA + U80-A SEQ1 Extra's

THERMAL

As of today, we’ve shipped around half of the THERMAL orders out to customers. Similar to the U80-A, the shipments for THERMAL from our supplier is being shipped in batches. The second and final batch will be shipped this month and will arrive next month with the M65-B units. The THERMAL units are quick to ship so we can expect to get them out first as soon as they come in. Apologies to all those who are waiting, we’re excited to see this unique board out on desks with new keycaps loaded on!

KARA

We're on our way to signing off the final production samples in all our release colours; once we sign this off we can open up the pre-order! We appreciate everyone's patience with this product, and we're super excited to show all the colours we've selected for this special board. 💛

U80-A SEQ1 Extras

We have a VERY SMALL amount of extra U80-A units available on October 10th at 10:00 PM PDT. It will be available at https://ramaworks.store/products/u80-a. LIMITED TO ONE PER CUSTOMER.

Project Updates - September 2020

THERMAL

The THERMAL units have arrived at our warehouse. Preparation for shipping begins this Monday! There will be extras once all of the pre-orders are shipped.

U80-A SEQ1 EXTRAS

Fulfilment for SEQ1 is more or less complete! We’ll be performing a stock count on Monday to confirm the numbers. Expect to see the sale shortly after - date and time will be announced!

JULES

Jules is now heavily in the machining stage - they’re expected to complete by the end of October/early November currently.

M65-B

M65-B is currently being packaged at the factory - they’ll be shipped to our warehouse once complete. The PCBs are due to be complete at the end of the month and sent to us for early October arrival. The MUTE mounts have already arrived at our warehouse.

M60-A LNY/OLIVIA

Similar to Jules, these are heavily in machining, they’re expected to complete by the end of October/early November.

M50-A + GRID SET B Keycaps

The M50-A units are also in machining currently and are expected to complete by the end of October/early November. The GRID SET B Keycaps are in stock and ready to ship.
KEYCAPS STORE

ZENITH

Production has officially begun for Zenith and they’re currently in the early stages of machining.

CANVAS

The Canvas deskmats are scheduled to ship from our manufacturer to our box supplier at the end of the month for packing - then shipped to our warehouse for fulfilment. Expect another month for sea-freight.

TRAY

The TRAYs are currently in production. We’ll post a further update once we receive an ETA from our manufacturer. UPDATE: Expected to complete around the end of October/Early November.

KATE

The double-shot mould production for the KATE keycaps has begun! We've finalised the placement of the legends for the tooling and progress is being made! We're working on the packaging in the meantime and can't wait to show more.

KARA

The surface finish is now being added to the mould and the master colour batches are being mixed to our specified colours. We are expecting to receive these in the following weeks. Once these are inspected, tested and signed off - we can begin the pre-order! We were really hoping KARA would be ready by the end of this month but as we mentioned in previous updates, we want to get this product exactly right as it’s our favourite to date - we cannot wait for people to try these out for themselves! We’re working on a line of accessories for the KARA series as well.

NEMO Decommission 2

The pre-order for NEMO Decommission 2 closes on the 30th of September. Production will start immediately afterwards.
NEMO PRE-ORDER

COLLABORATION CAPS

We've added the new RWxNK WAVE SEQ2 cap to our store! This cap is machined from Stainless Steel and features a unique chromatic Blue/Purple PVD. This coating is tough to produce as it requires multiple PVD coatings to achieve the multi-colour finish.
KEYCAPS STORE

GRID SEQ2 Caps / M65-B / M60-A Olivia+LNY / M6-C YOLK + More

GRID SEQ2 Keycaps

We’ve received the colour samples for the SEQ2 release of the GRID caps, we’re happy with how the colour has come out and are continuing with the manufacturing run, we expect to ship the caps next month.

M65-B

M65-B are all in anodising (Aluminium Editions) and PVD coating now (TANK Edition) - we expect the units to be finished at the end of this month and the Polycarbonate units shortly after. These are all in the final stages, and we hope to have them packaged next month and sea-freighted off to our warehouse for final packing and shipping.

M60-A Olivia / LNY

Both M60 editions have finished machining and are currently being polished before the next stages of post-processing.

M6-C YOLK

The remainder of the M6-C YOLK editions will be finished by the middle of this month, and we can expect to receive them by the end of the month for shipping

U80-A Remaining units / THERMAL

The shipping container is ordered, and these are all being packed and will be off to Australia shortly.

ZENITH

Our most recent Foundry offering, ZENITH, has concluded pre-orders. Any extra allocated stock units will be available through our store until sold-out. We expect machining alone to take around 4-6 months.

Australian Warehouse - STAGE 4 Restrictions

As of last week, Melbourne was placed into Stage 4 lockdown, and only some businesses can operate under these newly introduced restrictions. RAMA WORKS is within the approved companies and will continue to operate and ship during this time. However we will be working at a reduced capacity until we write-out Worker Permits for our temporary packing staff - we are sorting this out as soon as possible. Our main priority is keeping our workers safe and operating within the Government guidelines.

CANVAS 2 / XL

The CANVAS is back open again for pre-order, this way we can supply the demand of the units. The pre-order will close on the 15th of August. At that point, we will then begin production

M10-C

The M10’s are shipping!! Excited to see these out 😁

COLLABORATION CAPS

For the first time, we have some Collaboration Keycaps available through our web store. They are also available alongside the keysets through the respective distributor sites.

U80-A Remaining Orders / PORT Replacements / THERMAL / M10 / ZENITH Final Days

U80-A Remaining Orders

We will be shipping the remainder of the U80-A orders as we were waiting on a stabiliser restock which had arrived today for the starter kits. We apologise for the delay and will quickly pack and get these units out!

THERMAL

All the THERMAL units are assembled and packed at our manufacturer. We are now in the process of ordering the container and getting it to our Australian warehouse. Will keep everyone updated to what the ETA for arrival is. As soon as it lands we will begin packing and shipping the orders out as quickly as possible.

M10-C

The M10-C’s are now all packed and we will be shipping out the units over the next few weeks!

ZENITH

The RAMA WORKS FOUNDRY ZENITH pre-order closes at the end of this month and we will then begin production. More can be read about it here: https://r.works/zenith

PORT PVD Replacements

We are still waiting on collating all the numbers for the replacement units of the PVD Rose Gold weights which were affected. Only a single batch of the PORT units was affected - we expect to collate all numbers within the next two weeks - we can then start to manufacture the replacements and ship them out as soon as possible!

NEMO!

Incredibly thrilled to see NEMO’s arriving in the wild - it’s been exciting to see which numbers everyone receives and hope they all love their new home 🥰

Here is an unboxing video from one of the lucky recipients:

TEAM CAPS SEQ2

We’re currently manufacturing the next season release of the RAMA WORKS TEAM Caps! Once they’re in our warehouse they’ll be available for immediate purchase!