Project Updates - June 2022

As we wait for products to arrive at our warehouse, we have been working on some items which will be included with our upcoming releases:

Microfiber Gloves:

Cleaning Cloths:

And some new products:
Playing Cards

WORK IN PROGRESS. Featuring holographic, foil and other premium features.

NFC Access Control Cards: 

We needed some elite access control cards for our office, so we decided to make our own! They’re stainless steel, weighing in at 25g and 0.8mm thick. There’s a deep-etched circular center on one side where the RFID chip sits, allowing us to not use the typical plastic lamination for one side of the card and have it remain full metal. They are laser etched, painted and have a lot of detail. These will first be available in stock alongside some of the other items arriving next month: The XO Team cap, XO Pens.

Collaboration Artisan Keycaps: 

We’ve received another batch of our collaboration caps which are currently being QC'd and packed by our warehousing team as quickly as possible to our distributors. For those who have purchased directly from us, please contact us through support@rama.works if you have moved/changed addresses and our team will be happy to assist as best we can.

XO Pens 

After initial QC we have opted to refinish the brass units of the XO PENS. We are expecting them to arrive by the end of this month leading up to the start of next month.
UPDATE: The first batch is inbound to our warehouse (the brass ones are being re-finished as we wernt’t satisfied with the finish of the brass units)

Chess Set: 

The first revision of the packaging came in which we are really happy with. It feels like a solid showcase piece you would want to keep on a coffee table. There have been some minor adjustments made and the second set of samples are en route.

JARS: 

We were expecting to receive the JARS last week, but the manufacturer has informed us of an issue with the rubber seals. The new gasket tooling will be finished by next week and the JARS will ship out that same week. We will post updates when this has been shipped through our socials e.g. Instagram, so please be sure to follow us if you haven’t already.
UPDATE: These are inbound to our warehouse.

60%/65% PCB's: 

The latest round of PCBs have arrived and we are currently performing further evaluation and testing. We are also remolding the PE Foam to adjust the sound signature and adding additional cutouts for the stabilisers.

THERMAL 

The SEQ 2 THERMAL units are in the final stages of assembly and packaging at the factory and will soon move to complete the assembly/packing of the THERMAL+ units. We will create another update when these are done and ready for sea-freight.

M60-B, M65-C, U80-B:

At this stage we’re looking at next year for fulfillment, we will keep updated if this is pushed forward.

KARA:

Pending the completion of the updated PCB’s we expect we can have the units completed soon after.

MATS: (IN PRODUCTION)

Packaging production is underway and when complete, will be assembled and shipped to our warehouse for fulfillment. We are expecting these to arrive in 2 months.

LOVE MATS DONATION:

Proceeds of our LOVE Mat edition MATS will be donated to Beyond Blue. Every month, thousands of people reach out to Beyond Blue for advice, support and information. Your donations go directly towards funding Beyond Blue’s Support Service so these calls don’t go unanswered. By supporting Beyond Blue, we are joining a community that is working to reduce the stigma, prejudice and discrimination that act as barriers to people reaching out for support. 

Doubleshot Keycaps  (KATE/CAPS):

The latest round of fine tuned samples have arrived and there are still very minor inconsistencies. We were still not 100% happy with the quality and again, Injection Molding is an iterative process - tooling after tooling changes until the end result is what’s expected. We are expecting to receive another batch soon, and will post pictures when they’re in.

INSTAGRAM 80K GIVEAWAY
We’ll be soon announcing a giveaway for reaching 80K followers, with a few exciting prizes!

🎁

U80

🎁

NEMO

🎁

MORE

🎁 U80 🎁 NEMO 🎁 MORE

Project Updates - April 2022

RAMA WORKS has invested our time and resources to continuously improve and bring the best quality products to our customers. Although we have constantly been trying our best to push all the products out on our end, we are unfortunately stuck with limitations. The Global Covid Pandemic has caused more delays this year, with businesses and logistics being completely shut, then reopening with reduced capacity causing a backlog. Understandably we know this is frustrating. However, we will continue to do our best and keep everything moving and work out ways to avoid this in the future.

Our team has been working on new and exciting ideas, which we want to source and produce locally to avoid any further halts to production due to the pandemic while supporting local businesses. So stay tuned to the magic our team has been working on!

Doubleshot Keycaps:
After receiving the last batch of samples a few weeks ago, we were not 100% happy with the quality. We made some adjustments to the doubleshot tooling, which is more involved due to the material shrinkage and material flow between the legends. The samples with the new adjustments will arrive soon, and we are confident they will meet our high-quality standards and proceed with production.

We’re also adjusting the case to have an extended internal hinge - we’ve received the updated sample of this and are happy with it, and it is what will be utilised for the end product.

Jar: Production nearly completed
After adjusting the top lid mould to increase the draft angle by 2 degrees to apply a heavier texture finish to improve the grip, we have also opted for a translucent finish for better wear, which would hide any visible scratches over time. Hopefully, if there are no further logistical delays due to covid restrictions with the supply chain, we should be on track to get these out in the next month as they are currently being all moulded.

For any further clarifications on your JARS order, please do not hesitate to get in contact with us at support@rama.work

Here’s how the finish is changing:


M6-C:

The M6-C PCB’s have finally arrived at our warehouse and are going through a rigourous quality check. We have the M6-C Dandy enclosures and GRID caps in our Melbourne Warehouse and will be ready to ship these shortly. We expect the remainder of the M6-C enclosures to be completed in 1-3 months. We’ll also make available in stock the new GRID colours we made for these.

RW KEYBOARD BUILD - SNAP AND WIN A U80 ⌨️ 😍 📸

Have you built your own RAMA WORKS Keyboard and want to add a U80 to your collection?!  💛 ⌨️ 🎁  

All you need to do is take a creative photo of your own RAMA WORKS Keyboard Build and share it on either Instagram, Facebook or Twitter & tag @ramaworks  including the hashtag #RWxMyKeyboardBuild. 

 The winning photo will be re-shared on all our social platforms 🥳

Our support team will get in contact with the winners via the information provided to organise your prize - we will do our best to provide the preferred colour keyboard to the winners - subject to availability ⌨️💛

👇Enter👇
Photo Competition Entry

Things to come:

👀


Global Updates:

Our manufacturing partners in Shenzhen / Shanghai have been placed under strict lockdown to curb the current COVID outbreak. This means that the global supply chain across all sectors will be disrupted for the foreseeable future. We are closely monitoring the situation and will continue to do our best under circumstances out of control. Thank you to all our loyal ongoing clients for their patients during these difficult times. We understand the delays can be frustrating, and in the ideal setting with no supply chain issues, we would be able to get the products to you in a timely manner. The past year has shown us how quickly things can change, so we are also adapting our Business by looking at new products we can source locally to avoid these issues and continue providing high-quality products.


Other Updates:

Timelines from the previous March update on our other products are still valid.

Project Updates - Late June 2021

JULES

At this point in time, our manufacturer has given us an ETA of early July for the remade VARIABLE plates. 

Allowing time for the plates to ship to our warehouse, fulfilment of solderable/VARIABLE plate Jules can resume in mid-late July.

The majority orders of the hotswap/FIXED plate Jules have now completed shipping.

It has come to our attention that member(s) of our support team have mistakenly informed some customers that the draft version of Jules was approved for production by its designer. 

The details of the situation were misinterpreted by our support team as the information passed through multiple people. This is not true and we apologise for any confusion caused.

KARA

Our manufacturer has informed us that the KARA production run of W01-A Internal Weights has still not left port since the 2nd of June due to ongoing issues with port availability.

The freight forwarder has even attempted to transport the container by truck to an alternative port with no success.

Currently, the shipment is expected to depart on the 26th of June and arrive by early-mid July.

Given the amount of time customers have now been waiting, we have decided to ship all KARA orders and then ship the W01-A weights separately once they have arrived.

Customers who have not yet received their KARA order can expect to receive a shipping confirmation within the next 1-2 weeks.

U80-A SEQ2

The partial batch of U80-A SEQ2 mentioned in the late May update is on the same shipment as the W01-A weights.

M50-A

Fulfilment of M50-A will begin as soon as possible alongside KARA.

ZENITH

The same port issues with W01-A/U80-A SEQ2 are also affecting Zenith. Once we have an expected shipping date, it will be posted here on the updates blog.

NEMO DECOMMISSION 2 + RW01 NIGHT EDITION

Shipment of all NEMO DECOMMISSION 2 and RW01 NIGHT EDITION orders are due to complete within the next 1-2 weeks.

RW PEN A

RW PEN A