KOYU PCBs / Internal Dampeners / RW FT Fasteners / U80-A Redesigns

Koyu PCB’s + Enclosures

The KOYU PCB’s have arrived and are fully programmed and ready to go. We will be visiting our manufacturer in early May to QC and check over the enclosures before they are shipped to our warehouse in Melbourne for final packaging and shipment.

Internal Dampener & RW FT Fasteners

Both the Internal Dampener’s and Fasteners will arrive in our warehouse this week.

The tools that come with the fastener should be complete by early next week and will ship out with the Fastener kits around this time.

U80-A Redesign

With the U80-A we’re introducing our new plate mounting & dampening solution. The Rama Works MUTE.

The MUTE isolates the plate inside the enclosure providing a unique typing experience.

Please note that this is under-development. See more at http://rama.link/u80

KOYU / Internal Dampener / M.2 SSD Enclosure / M60-A SEQ1 Giveaway

KOYU

The Rama Works KOYU has finished machining and is now moving to the next stages of production. From here they will be surface treated, Anodised or PVD coated and then carefully packed to their base configurations for packaging. We’re super excited to show the packaging we have created for our latest board! We will also be visiting our manufacturers to complete a QC of the products before they’re freighted to our warehouse for final assembly, further packaging and shipment.

Internal Dampener / RW Fastener Kits

We’ve received the first off-tool samples of the Internal Dampeners, we have signed off and they have begun production. We anticipate that they’ll be ready to ship by the end of the month or early next. The fastener kits should also be ready to ship around this time frame.

We also have the Internal Dampener and Fastener Kits available to purchase through our website! If you would like us to add it to an existing order, please reply to your order confirmation email.

M.2 SSD Enclosure

We’ve begun tests on the electronics on our USB 3.1 Gen 2 M.2 PCIe Bridge Controller for the Cache Portable SSD. We’ll soon be completing and prototyping the enclosure for this unit for further testing.

Note: Hand-soldered PCB for testing/evaluation.

M60-A Giveaway

We’re giving away an M60-A and some other Rama Works products! You can enter through the link below

KOYU - 2 days left for pre-order / Guides / Inventory / Tray

Final 2 days left to pre-order the KOYU before we close orders and begin production next month!

Keyboard Guides

We have a series of guides for our M60-A keyboard (and generic guides such as stabiliser lubing) and we've been adding more every week, if you're having some trouble or just want to see what the default layout is go check it out through the link below!

Inventory 2 / Home

Our Inventory 2 will be returning along with our homeware offerings! Early next year, stay tuned!

M60-A Shipping / KOYU / M6-B / XO Tool

M60-A Now Shipping!

M60-A’s have arrived in our warehouse and we have begun shipping orders! As of today we have packed all Australian orders which will be picked up tomorrow. We will continue packing and shipping orders in batches - owners will receive a shipping notification email when the order is packed and ready! There is a lot to go through, so it will take some time to get through each order - we will however be going through them as quickly as we can.

First batch complete!

KOYU RACE

The KOYU RACE prototype is in, see some pictures below! We also will have the HAZE prototype in the next few weeks.

Circuits!

The prototype KOYU PCB is in alongside the M6-B production PCB’s.

XO Switchpuller Tool

A Stainless Steel 304 Switch Puller. Laser-etched. XO detailing. Arriving next month along with our new Rama Wear apparel.

M60-A INCOMING / PARVUM / MIGHTYKILLERS

M60-A

The M60-A enclosures are landing tomorrow by sea-freight in Melbourne (1st of November)! The container will then be going through customs and then delivered to our warehouse once cleared. Once in our warehouse we will aim to ship out the M60-A keyboards as quickly as possible!

PARVUM ITX CASE

We’re excited to be showing some of the work for the design we have created for PARVUM SYSTEMS. We will be creating a prototype for them and we will reveal more details to follow once tested. All panels are machined from Aluminium.

MIGHTYKILLERS

We’ve been wanting to do camera accessories for a long time now, and a great opportunity came up with someone we’ve been following for a while with MIGHTYKILLERS. We have designed for them a series of accessories that we look forward to releasing to the market. To be released: 135 Dual Film Canister, 120 Quad Film Canister, Soft Release & a Cold Shoe Cover.

KOYU

One month remains to join the KOYU preorder. In the following weeks we will be showing more of the board and its capabilities/design. Pictured below is the hand-polished mirror finish PVD brass TANK Edition.