M6-C / LNY Inventory 2 arrival / M10-C PCB

M6-C ICED / YOLK / RWxRW

The ICED / YOLK M6’s have arrived, and they are by far our favourite editions we’ve done to date! The top housings for the RWxRW edition was also included in this, but the bases are still to arrive.

Inventory 2 LNY Aluminium / Titanium

The Inventory 2 LNY editions have arrived! We’re packing them now and they’ll go out as soon as they’re ready! We’re stoked with how the Titanium came out and the machining lines on it, we’re excited to see these filled with cards!

M10-C

The M10-C PCB’s have been received in our warehouse and will be shipping out to those who ordered the PCB’s individually!

THERMAL

Will be ready to pack and ship in a container next week 🚢!

M50-A PCB / Inventory 2 bands/ RW01 parts/ ICED Dampeners / Heavy Industry SEQ3

M50-A PCBS

The M50-A PCBs have arrived! The prototype enclosure should also be arriving in the following weeks in which we’ll produce a typing video. We’re also adjusting our setup for improved audio.

Inventory 2 Bands

These have also arrived, now we’re awaiting the Inventory 2 wallets themselves which have been shipped - however, given the current reduction of transit lanes it will take longer to arrive than usual.

ICED Dampeners

Now in stock and shipping next week!

RW01 Wheels

Have are arrived and are waiting to be paired with the car itself! They are en route.

Heavy Industry SEQ3

Arrived yesterday and we will start packing and shipping starting this upcoming Monday and throughout the week!

WAVE Ti / M60-A SEQ2 / M6-C / Caps & more!

WAVE SEQ2 Ti

The Titanium Wave caps have arrived in our warehouse and will be shipping out once packaged. These, we think, are our best keycaps yet - the smoothness of the finish surpasses any we have made before. We’re excited for people to receive these!
We have a limited amount left in stock available to order.

M60-A SEQ2 Starter Kits

As we await the M60-A SEQ2’s to arrive, we’re packaging a lot of the accessories that will be shipping with some orders. The M60’s are due to arrive later this month in our warehouse for order-packing and shipping.

M6-B PCB’s

The M6-B PCB’s have arrived for the M6-C production. Orders of just the PCB will be shipped when packaged. We’re also awaiting the enclosures and GRID keycaps for the M6-C shipments to go out.

Switchpuller XO

A large number of Switchpuller orders have gone out - and we’re looking forward to seeing these to good use! We have a large amount in stock for anyone who wants one.

New packaging and TEAM Caps

The packaging we were waiting on has arrived and we have started to ship the TEAM Caps. If you have ordered a TEAM Cap alongside other in-stock items, it will be going out.

Collaboration Keycaps - MIZU

The MIZU Collaboration keycaps have arrived and are being packaged to be sent to the distributors. We’re really happy with how these turned out and the blue glow!

M60-A Shipping / KOYU / M6-B / XO Tool

M60-A Now Shipping!

M60-A’s have arrived in our warehouse and we have begun shipping orders! As of today we have packed all Australian orders which will be picked up tomorrow. We will continue packing and shipping orders in batches - owners will receive a shipping notification email when the order is packed and ready! There is a lot to go through, so it will take some time to get through each order - we will however be going through them as quickly as we can.

First batch complete!

KOYU RACE

The KOYU RACE prototype is in, see some pictures below! We also will have the HAZE prototype in the next few weeks.

Circuits!

The prototype KOYU PCB is in alongside the M6-B production PCB’s.

XO Switchpuller Tool

A Stainless Steel 304 Switch Puller. Laser-etched. XO detailing. Arriving next month along with our new Rama Wear apparel.

M60-A / M6-B / TH 88 Caps / New collabs / Heavy Industry / KOYU

M60-A

All M60-A enclosures have been completed and will be shipped by sea-freight to our Melbourne Warehouse. A little delay has occured due to the Mid-Autumn festival/National holiday but they will be returning in the next few days to promptly pack and prepare the shipping container for shipment. Sea-Freight will take around 2-3 weeks to arrive to our bays in Melbourne, Australia. We will then package and ship in batches of colour and country and aim to complete this over the course of a week with the help of a few hired hands.

A freshly anodised M60-A Dusk

Meanwhile our team down under (Wilba, Kate & Rama) have been programming, testing and packing the PCB’s whilst we wait for the freight shipment of the M60-A enclosures to arrive. We appreciate the patience of everyone who participated in the pre-orders and we’re excited to see these unboxed and assembled in their own unique combinations.

M60-A Manufacturing shots

During our visit to our manufacturers we where lucky enough to see some of the M60-A’s undergo the anodising process. Here are some photos of the enclosures receiving their perfect colour. The jigs are all custom made to hold the enclosures in such a way to hide the anode mark. Anodising is all about timing and craftsmanship by extremely skilled workers. Seeing the process in person really makes you appreciate the beauty of chemical reactions much more. First the M60-A goes through a number of cleaning baths to remove any contaminates which may be present on the surface, it then is placed immediately into an ultrasonic bath for a matter of minutes and directly placed into multiple colour tanks where it quickly starts to show its colour.

M6-B

M6-B is well into production. We will be receiving the XO caps from Signature Plastics shortly, the PCB’s will be complete in 2-3 weeks and the enclosures after that. We have ordered many extras to stock on our site for those who missed out.

Pas that, the new XO pins have arrived! This time we laser-cut them out of mirrored stainless steel. These are much tougher and cleaner than the first iteration.

TypeHype 88 Edition Keycap

Our limited edition Type Hype caps are starting to arrive to our international customers, very happy with how our first enamel filled keycap came out. A lucky 2 orders will also be receiving an unreleased yellow-enamel filled variant, we hope to see it on a board somewhere!

New Collabs

Introducing our latest keycap release with the latest GMK set, GMK Chocolatier. We are offering the Blue PVD coated X/O caps in Cherry Profile and a ‘Golden Ticket’ in Gold PVD! These are available through various vendors who are offering the keyset.

Heavy Industry

We finally launched the Heavy Industry keyset to be paired with our latest offerings, the KOYU and M60 keyboards. Check it out through the link below! It is also suited for other products on the market and can be accented with the yellow or more subtle without.

https://rama.works/pbt-heavy-industry/

KOYU

New renders have been uploaded to their respective KOYU pages to show the colours of the board in its various colours.

In other news!

We’re on Apple News! If you own an iOS device subscribe to the “Rama Works” news channel and follow these updates from there also.

U80 SEQ 1 PCB / M6-B Proto / Lumen Proto

U80 Prototype PCB

A lot of people have been waiting for an update on this project, along with us! Finally received in the prototype PCB's today. Will be doing fit testing this week so then we can move quickly with the vendor to getting the product to a production-ready state. Here are some pics of the prototype PCB & Enclosure.

M6-B Proto

LEDs in action! Rainbow mode. Completely programmable via QMK and can be used to indicate a miriad of things.

The M6-B is on it's final week for pre-order, get one now before it's too late:

Lumen (Utility) Light Prototype

A few weeks ago, we teased a concept image of a product we are working on without revealing what it is. The Lumen is an RGBW utility light controllable via HSV (Hue, Saturation, Value/Brightness), the interface consists of two dials which can be clicked in to control different parameters, Hue / Saturation, Hue / Brightness, Pulse Rate / Speed etc. 

Today Wilba (our Hardware Engineer) brought over the prototype test-board to play with and we are now confident we can miniaturize it and create a neat product from it.

A lot of people have noticed the deskmat we have in the background of a lot of these images, we have stock arriving at our warehouses in the following weeks, expect something soon!

It's named the Canvas and it's perfectly ratio'd to compliment 60% sized keyboards.