GRID SEQ2 Caps / M65-B / M60-A Olivia+LNY / M6-C YOLK + More

GRID SEQ2 Keycaps

We’ve received the colour samples for the SEQ2 release of the GRID caps, we’re happy with how the colour has come out and are continuing with the manufacturing run, we expect to ship the caps next month.

M65-B

M65-B are all in anodising (Aluminium Editions) and PVD coating now (TANK Edition) - we expect the units to be finished at the end of this month and the Polycarbonate units shortly after. These are all in the final stages, and we hope to have them packaged next month and sea-freighted off to our warehouse for final packing and shipping.

M60-A Olivia / LNY

Both M60 editions have finished machining and are currently being polished before the next stages of post-processing.

M6-C YOLK

The remainder of the M6-C YOLK editions will be finished by the middle of this month, and we can expect to receive them by the end of the month for shipping

U80-A Remaining units / THERMAL

The shipping container is ordered, and these are all being packed and will be off to Australia shortly.

ZENITH

Our most recent Foundry offering, ZENITH, has concluded pre-orders. Any extra allocated stock units will be available through our store until sold-out. We expect machining alone to take around 4-6 months.

Australian Warehouse - STAGE 4 Restrictions

As of last week, Melbourne was placed into Stage 4 lockdown, and only some businesses can operate under these newly introduced restrictions. RAMA WORKS is within the approved companies and will continue to operate and ship during this time. However we will be working at a reduced capacity until we write-out Worker Permits for our temporary packing staff - we are sorting this out as soon as possible. Our main priority is keeping our workers safe and operating within the Government guidelines.

CANVAS 2 / XL

The CANVAS is back open again for pre-order, this way we can supply the demand of the units. The pre-order will close on the 15th of August. At that point, we will then begin production

M10-C

The M10’s are shipping!! Excited to see these out 😁

COLLABORATION CAPS

For the first time, we have some Collaboration Keycaps available through our web store. They are also available alongside the keysets through the respective distributor sites.

U80-A Remaining Orders / PORT Replacements / THERMAL / M10 / ZENITH Final Days

U80-A Remaining Orders

We will be shipping the remainder of the U80-A orders as we were waiting on a stabiliser restock which had arrived today for the starter kits. We apologise for the delay and will quickly pack and get these units out!

THERMAL

All the THERMAL units are assembled and packed at our manufacturer. We are now in the process of ordering the container and getting it to our Australian warehouse. Will keep everyone updated to what the ETA for arrival is. As soon as it lands we will begin packing and shipping the orders out as quickly as possible.

M10-C

The M10-C’s are now all packed and we will be shipping out the units over the next few weeks!

ZENITH

The RAMA WORKS FOUNDRY ZENITH pre-order closes at the end of this month and we will then begin production. More can be read about it here: https://r.works/zenith

PORT PVD Replacements

We are still waiting on collating all the numbers for the replacement units of the PVD Rose Gold weights which were affected. Only a single batch of the PORT units was affected - we expect to collate all numbers within the next two weeks - we can then start to manufacture the replacements and ship them out as soon as possible!

NEMO!

Incredibly thrilled to see NEMO’s arriving in the wild - it’s been exciting to see which numbers everyone receives and hope they all love their new home 🥰

Here is an unboxing video from one of the lucky recipients:

TEAM CAPS SEQ2

We’re currently manufacturing the next season release of the RAMA WORKS TEAM Caps! Once they’re in our warehouse they’ll be available for immediate purchase!

M6-C / LNY Inventory 2 arrival / M10-C PCB

M6-C ICED / YOLK / RWxRW

The ICED / YOLK M6’s have arrived, and they are by far our favourite editions we’ve done to date! The top housings for the RWxRW edition was also included in this, but the bases are still to arrive.

Inventory 2 LNY Aluminium / Titanium

The Inventory 2 LNY editions have arrived! We’re packing them now and they’ll go out as soon as they’re ready! We’re stoked with how the Titanium came out and the machining lines on it, we’re excited to see these filled with cards!

M10-C

The M10-C PCB’s have been received in our warehouse and will be shipping out to those who ordered the PCB’s individually!

THERMAL

Will be ready to pack and ship in a container next week 🚢!

U80-A/THERMAL PCB's + Buckle + Other updates

THERMAL / U80-A PCB

The PCB’s have arrived and we’ll be shipping out individual orders that have the PCB this upcoming week!

FURTHER UPDATES / TIMELINES

WEAR Bracelet: Shipping April
Inventory 2 LNY: Shipping April/May
LNY Keycap: Shipping April/May
FILM Accessories: Shipping April
GRID Keycaps: Shipping April
NEMO: Shipping April
NEMO RW01 Car: Shipping April
M6-C: Shipping April/May
M10-C: Shipping May
U80-A/THERMAL: In warehouse April/May
M65: Machining completed roughly in June

As mentioned in previous blog updates, we’re increasing our manufacturing output with the addition of more CNC mills to the factory and aim to produce our products within tighter timelines!

RAMA WORKS® BUCKLE

We at RAMA WORKS®, love satisfying mechanisms and clicky things - so we designed a completely metal buckle with a new latch design. Suited for bags, belts, apparel and any other EDC. The first round of prototyping is complete and we can't wait to show more! We will be manufacturing these in a variety of sizes and offer them both at wholesale and our own retail channels, as we’d love to see these used on some great bag designs from other manufacturers! The design of the buckle mechanism is unique and enjoyable to use.

JULES

Jules is available for pre-order until the 15th of April - we’ll also be posting a typing video when we receive new enclosures next week!

ramaworks.store/collections/rama-works%C2%AE-foundry

NEMO / LNY & MORE

NEMO Packaging

The NEMO’s have completed machining and are in the final stages of surface finishing. The packaging has also arrived in our warehouse. We’re also working on extra inclusions to include with each order! The first batch release of NEMO is super important to us and we’re honoured to see these in peoples collections soon.

U80-A / THERMAL

We’ll have updates on the U80 and THERMAL after Chinese New Year, in a few weeks!

M60-A LNY Edition

Following the short-run limited release of the M60-A OLIVIA Edition, we've introduced the M60-A LNY Edition. Featuring a bold RACE Anodised aluminium enclosure with the double-happiness enamel filled Brass backweight.

Backweights from all editions/releases of our M60 are backwards compatible.

Each LNY edition order comes with a RAMA WORKS® Red Pocket and LNY Sticker set

M10-C

The M10 is BACK! This time it will be manufactured and solely sold through RAMA WORKS®. The PCB is backwards compatible with previous revisions and now features RGB LEDs and comes in hot-swap and solderable variants.

M6-C

Our collaboration with Render Weekly is now available to preorder. Featuring design elements put together by the winner, @nachcastillo.designs.

Wallpapers!

We've curated some of our recent images into downloadable wallpapers, follow the link below to download them. We'll expand and add to these as time goes on, and also add some more from our archives.