We are excited to announce that the UNIT-80 will be available for pre-order via the Rama Works store in Q2 2019. We have refined the design since the initial prototype and look forward to presenting this closer to release.
PBT Heavy Industry is shipping in the next week! If you need to update your address, please contact us at firstname.lastname@example.org (or reply directly to your order confirmation email). If you would also like them to arrive sooner - please let us know and we can send an invoice for DHL Express shipping. All Australian orders are already out, and International will be packed this weekend for shipment.
A filmed comparison
NOTE: We've noticed that it's a little hard to tell between the dampener and weight and will be re-filming with non-silent switches installed.
This a video showcasing between no-Internal Weight/Dampener, the Internal Dampener and the Internal Weight.
W01 Internal Weight
W02 Internal Dampener
Compatible with the M60-A and KOYU (cannot be used at the same time)
The sound was filmed using an array of stereo microphones. No post processing (i.e noise reduction) was used.
M60-A SEQ2 has launched!
To celebrate we created a video.
This is a celebration of the M60-A, inspired by a community of people that have allowed us to be at the center of their workspace. Featured in this video are the new M60 finishes, MILK and HAZE, and the STEALTH EDITIONS of MOON and KURO.
You can check out more information on SEQ2 by following this link: https://rama.works/#/m60a-seq2/
We have a lot of new features and options available with the SEQ2 launch, including the new Internal Dampener and our new signature fixture series. All accessories are compatible with previous and future releases.
We will be producing a video showcasing the differences of sound both with and without the internal dampener within the upcoming week!
The KOYU will also be shipping with our new signature fasteners and will complete the look!
PBT Heavy Industry
PBT Heavy Industry is en-route to our warehouse where we will be shipping them out in the following weeks - we’re excited to see these adorned on some keyboards!
All M6-B units have been shipped as of last week and we will have extras available this week!
We have a number of units of the M60-A which will be first offered to the waiting list then open to the public shortly after. This is in very small supply.
The SEQ2 Wave caps will be available in stock, along side the M6-B and M60-A extras / with the KURO / MOON / SAGE / LAKE / DUSK colourways
Final 2 days left to pre-order the KOYU before we close orders and begin production next month!
We have a series of guides for our M60-A keyboard (and generic guides such as stabiliser lubing) and we've been adding more every week, if you're having some trouble or just want to see what the default layout is go check it out through the link below!
Inventory 2 / Home
Our Inventory 2 will be returning along with our homeware offerings! Early next year, stay tuned!
M60-A Now Shipping!
M60-A’s have arrived in our warehouse and we have begun shipping orders! As of today we have packed all Australian orders which will be picked up tomorrow. We will continue packing and shipping orders in batches - owners will receive a shipping notification email when the order is packed and ready! There is a lot to go through, so it will take some time to get through each order - we will however be going through them as quickly as we can.
The KOYU RACE prototype is in, see some pictures below! We also will have the HAZE prototype in the next few weeks.
The prototype KOYU PCB is in alongside the M6-B production PCB’s.
XO Switchpuller Tool
A Stainless Steel 304 Switch Puller. Laser-etched. XO detailing. Arriving next month along with our new Rama Wear apparel.
The M60-A enclosures are landing tomorrow by sea-freight in Melbourne (1st of November)! The container will then be going through customs and then delivered to our warehouse once cleared. Once in our warehouse we will aim to ship out the M60-A keyboards as quickly as possible!
PARVUM ITX CASE
We’re excited to be showing some of the work for the design we have created for PARVUM SYSTEMS. We will be creating a prototype for them and we will reveal more details to follow once tested. All panels are machined from Aluminium.
We’ve been wanting to do camera accessories for a long time now, and a great opportunity came up with someone we’ve been following for a while with MIGHTYKILLERS. We have designed for them a series of accessories that we look forward to releasing to the market. To be released: 135 Dual Film Canister, 120 Quad Film Canister, Soft Release & a Cold Shoe Cover.
One month remains to join the KOYU preorder. In the following weeks we will be showing more of the board and its capabilities/design. Pictured below is the hand-polished mirror finish PVD brass TANK Edition.
The ‘king’ caps for our friends BOXR GG have been completed and will be shipped to them next week where they will pack and ship them! These have been machined from Brass, hand-polished to a mirror finish and PVD coated to their perfect gold colour. Excited to see these out in the wild!
The enclosures have officially begun their journey of sea-freight to our Melbourne warehouse. Today we spent programming and packing PCB, and will be again tomorrow. About 3/4th complete - anticipate having most of it completed by tomorrow.
GMK Wavez cap with Glow in the Dark enamel infill. More to follow.
All M60-A enclosures have been completed and will be shipped by sea-freight to our Melbourne Warehouse. A little delay has occured due to the Mid-Autumn festival/National holiday but they will be returning in the next few days to promptly pack and prepare the shipping container for shipment. Sea-Freight will take around 2-3 weeks to arrive to our bays in Melbourne, Australia. We will then package and ship in batches of colour and country and aim to complete this over the course of a week with the help of a few hired hands.
Meanwhile our team down under (Wilba, Kate & Rama) have been programming, testing and packing the PCB’s whilst we wait for the freight shipment of the M60-A enclosures to arrive. We appreciate the patience of everyone who participated in the pre-orders and we’re excited to see these unboxed and assembled in their own unique combinations.
M60-A Manufacturing shots
During our visit to our manufacturers we where lucky enough to see some of the M60-A’s undergo the anodising process. Here are some photos of the enclosures receiving their perfect colour. The jigs are all custom made to hold the enclosures in such a way to hide the anode mark. Anodising is all about timing and craftsmanship by extremely skilled workers. Seeing the process in person really makes you appreciate the beauty of chemical reactions much more. First the M60-A goes through a number of cleaning baths to remove any contaminates which may be present on the surface, it then is placed immediately into an ultrasonic bath for a matter of minutes and directly placed into multiple colour tanks where it quickly starts to show its colour.
M6-B is well into production. We will be receiving the XO caps from Signature Plastics shortly, the PCB’s will be complete in 2-3 weeks and the enclosures after that. We have ordered many extras to stock on our site for those who missed out.
Pas that, the new XO pins have arrived! This time we laser-cut them out of mirrored stainless steel. These are much tougher and cleaner than the first iteration.
TypeHype 88 Edition Keycap
Our limited edition Type Hype caps are starting to arrive to our international customers, very happy with how our first enamel filled keycap came out. A lucky 2 orders will also be receiving an unreleased yellow-enamel filled variant, we hope to see it on a board somewhere!
Introducing our latest keycap release with the latest GMK set, GMK Chocolatier. We are offering the Blue PVD coated X/O caps in Cherry Profile and a ‘Golden Ticket’ in Gold PVD! These are available through various vendors who are offering the keyset.
We finally launched the Heavy Industry keyset to be paired with our latest offerings, the KOYU and M60 keyboards. Check it out through the link below! It is also suited for other products on the market and can be accented with the yellow or more subtle without.
New renders have been uploaded to their respective KOYU pages to show the colours of the board in its various colours.
In other news!
We’re on Apple News! If you own an iOS device subscribe to the “Rama Works” news channel and follow these updates from there also.
The ‘wait’ for something isn’t the most conscious desire, but that anticipation creates nostalgia.
At Rama Works, you’ve embraced this. From updates of the blog, to direct communication with the community, being part of a Rama Works product doesn’t just start when you receive it. If you’ve ever received a Rama Works product, you know that no detail is overlooked.
Let us take you on a journey that will capture that sensory experience, and explore the gravitational interaction between aesthetic and design. The Rama Works ‘X’ element personifies the understanding that taking something away doesn’t necessarily make it less.
Introducing KOYU, our latest offering. Go check out the launch video and preorder now at https://rama.works/koyu
The new USB A > C cables have arrived, 1.5m long in black braided with metal ends, laser etched.
Three of the six colours have been all anodized as of last week and we anticipate all colours to be finished properly. We will be arriving to our manufacturer next week for a final QC of all the boards before they’re shipped to home base! Please note that we’ll be away from the office until the 11th of September and slower to reply to all support inquiries, but will do our best to answer as promptly as we can.
We are incredibly excited to announce our latest offering, the KOYU 65% Keyboard. It’s an inspiration and evolution of our previous offerings, but entirely new in its own way - we’ve taken all the great aspects of the M60-A and integrated it into the KOYU.
Integrated 4.5MM plate, In-Switch RGB, hotsockets, fixed layout, optional internal weight (same weight as M60-A / interchangeable). Launching mid-September.
BOX Royal Switches - Re-tooled
The replacement BOX Royal Re-tooled switches have arrived and we are promptly having them packed, along with the GMK Stabilisers.
U80 Prototype PCB
A lot of people have been waiting for an update on this project, along with us! Finally received in the prototype PCB's today. Will be doing fit testing this week so then we can move quickly with the vendor to getting the product to a production-ready state. Here are some pics of the prototype PCB & Enclosure.
LEDs in action! Rainbow mode. Completely programmable via QMK and can be used to indicate a miriad of things.
The M6-B is on it's final week for pre-order, get one now before it's too late:
Lumen (Utility) Light Prototype
A few weeks ago, we teased a concept image of a product we are working on without revealing what it is. The Lumen is an RGBW utility light controllable via HSV (Hue, Saturation, Value/Brightness), the interface consists of two dials which can be clicked in to control different parameters, Hue / Saturation, Hue / Brightness, Pulse Rate / Speed etc.
Today Wilba (our Hardware Engineer) brought over the prototype test-board to play with and we are now confident we can miniaturize it and create a neat product from it.
A lot of people have noticed the deskmat we have in the background of a lot of these images, we have stock arriving at our warehouses in the following weeks, expect something soon!
It's named the Canvas and it's perfectly ratio'd to compliment 60% sized keyboards.
Hey all! Apologies for the late update, been meaning to post one for a while but caught up in accounting, unfortunately, always the things you don't want to do. But back to what we love now!
All the m60-A PCB's are in as of last week. Currently unboxing them all and sending them in batches to our in-house Hardware Engineer Wilba to program and test over the next few weeks.
They will then all be packaged and warehoused until the enclosures arrive.
All M60-A enclosures are all machined and currently undergoing Anodising by colour batch. A few colours have already been completed. All PVD coating and hand-mirror polishing have been complete on the brass components. We estimate all enclosures to finish around early September - and we will be visiting our suppliers to do a final QC before they are forwarded to our warehouse for final assembly and packaging. We will be away for a week and a half from the first week of September and reachable via our contact support email: email@example.com. Sea-Freight should take roughly 2 weeks and we will promptly pack each order in batches of Country, Colour and Contents.
All stainless steel fasteners and black hex screws are in and we are also creating a manual on how to assemble the M60-A. Here is an artwork we commissioned by the very talented Janne Iivonen which will be used as the front cover for the manual, it shows the diversity and playfulness we strive for within our products and customers.
We are looking forward to shipping these out and seeing them customised in their own unique ways by the new owners!
Excited to launch the new variation of the M6-B, it includes all the great features of the previous revision but now with RGB lighting! The PCB is also backwards compatible with any existing M6 enclosure.
Check out the prototype PCB from Wilba here: https://www.instagram.com/p/Bmm5NV4DYpz/
It's available for pre-order now at:
WAVE SEQ 2
The new variation on the coveted wave keycap series. Available for preorder now alongside the M6-B.
In other news
The 'Project Updates' blog is now 'Proto(Type)' It is what identifies us across our spectrum and excites, mesmerizes and captivates our audiences. It's us on a page. More to come.
A big pallet arrived today at the Rama Works warehouse and it's the production packaging for the M60-A accessories - these are for the Interior Weight, Back Weight and PCB. Looking forward to packaging these all together and shipping them out in the following months!
Always enjoyable to take apart and hold the parts which make up the M60-A keyboard, excited for those who participated in the preorder to experience unpacking and assembling this keyboard! Also go check the M60-A box here: https://rama.works/projectupdates/2018/6/11/m60-a-packaging
Have also for the past two weeks been testing ZFrontiers new profile keyset, the KAT profile. It's a very ergonomic and a very comfortable set to type on and we're looking forward to potentially releasing a set with this profile. More information on this keyset can be found here: https://www.zfrontier.com/post/detail/7625
A lot have asked on the status of the Instrument board. Over the past couple of months, we made developments on creating a low profile keyboard with our custom-moulded keycaps.
The initially designed keycap was for the Kailh Low-Profile switch - however after initial testing with 2U caps we found that it was not suitable and halted the project. We had an entire set of 1U and 2U keys prototyped for testing.
A lot of work was done in creating a complete package, below is the PCB designed by our Hardware Engineer, Wilba.
A new solution
After being in contact with Cherry we where able to procure one of the first samples of the Cherry MX Low Profile mechanical switch. The design of this switch has some major advantages over the Kailh switches we initially selected. It has a light-pipe which was designed specifically for SMD RGB LED's, the stem is much more stabilised which can handle 2U keys on its own and the switch supports normal MX keys (unlike the Kailh which is a proprietary stem)
The low-profile switches haven't been released yet, but we're waiting on a prototype order of more units so that we can begin testing. The PCB will also be redesigned with the footprint for the Cherry MX Low Profile switch.
The design for our new stabiliser is complete and will begin the second round of prototying. We have added in the threaded-insert and adjusted some of the model dimensions. The base of the stabiliser is 'pre-clipped' and has a small landing pad to reduce 'bottoming out' noise. The current proposal is to produce the stabiliser out of POM due to its low coefficient of friction.
The Aluminium Olivia XO caps are packed and shipping to our distributors via DHL Express, they should arrive to our distributors soon! We will have extras available in 2-3 weeks, stay tuned.
A majority of the XO cards have arrived and we have packed all colours except for LNY Gold and Sage (we are awaiting replacement Sage units). We will be shipping out a bulk of orders over the week. We anticipate the replacement Sage and Gold XO cards to arrive this Friday.
The Aluminium and PVD Brass Tray's are all packed and ready for shipping - expect order fulfilment emails to come through soon!
Major CAD design work and initial testing has been complete for the Rama Works Stabiliser, our goals are to enhance aesthetics, reduce rattle/sound and increase smoothness. More to come.
Early CAD EXPERIMENTS
Final prototype > injection moulding > material exploration/testing > packaging > distribution