GRID Caps arrived / HI SEQ2 Shipped / WEAR / M60-A SEQ2

GRID Keycaps have arrived!

We’ve taken delivery of all our injection moulded, polycarbonate, GRID keycaps in all their beautiful colours. We’ll be packing these over the week after we ship the Tray/Inventory 2 Brass PVD orders. We’ll then start shipping out the GRID orders.

L1040072.JPG

Heavy Industry SEQ2

Most orders of our PBT keyset is now complete, we’re looking forward to seeing them on some great setups!
The next round of our Heavy Industry PBT Keycap set is now available for preorder alongside the M65-B.

L1040055.JPG
L1040060.JPG

WEAR Production

Our apparel is now in production, any extra stock from our production run is currently available on our store in limited quantities! All units are custom made and are not re-branded existing stock.

RW-MERCH-A.1743.JPG
RW-WEAR-SIZE-CHART-A-01.png

M60-A SEQ2

The M60-A SEQ2 units have been completed for some time now, since early October. We’ve had some delays with the logistics in getting the units here, but we’re in the final stretch with clearing some documentation in getting our container here, so we have no issues when it lands in port. We hope that it will land in 2-3 weeks. Everything in our warehouse is packed and ready to go for when they arrive so we can get all the units out as quickly as possible. All units will be receiving our XO Switchpullers as well.

L1000562.JPG

M6-C, M60-A SEQ2, GRID CAPS, U80-A, Inventory 2 SEQ2, Tray

M6-C

The M6-C enclosures have arrived, we have everything in stock except for the GRID caps & the M6-C Silicone bases. We expect these to all arrive this month though! Then all units will be shipped out if everything in the order is in stock.

L1040016.JPG
Animated GIF-downsized_large (5).gif

We have approved the latest batch of M6-C bases for production; several improvements were made since the initial design. On the left is the first production sample, but given the density of the material, it would cave in too much, so we made some adjustments so that it sits more flush around the PCB.

L1030999.JPG
L1040015.JPG

GRID Keycaps

We’ve received the production polycarbonate colour samples of the GRID keycaps and have begun production on them! We’re looking forward to seeing these on keyboards and shipping them with our M6-C units.

PRODUCTION IS DUE TO COMPLETE BY 1st OF NOVEMBER

We have limited extra stock allocations from manufacturing available through our webstore.

L1040006.JPG
L1040008.JPG
L1040011.JPG

Inventory 2

Inventory 2 Aluminium & Titanium have arrived and will be packed early next week for immediate shipping - the brass units will be sent to us early next week to receive before next weekend.

L1040014.JPG

Tray

As with the Inventory, we’ve received the Aluminium trays in our warehouse and expect the brass ones to arrive early next week. They will be assembled with the silicone feet then packaged for shipping!

L1040013.JPG

U80-A Production

The U80 production is well underway! All the plates have been completed and have been mirror-polished and are now in PVD coating. A majority of the brass underweights have been machined and are off to mirror-polishing. The bases have mostly been completed - machining will soon begin for the top housings. We will also soon start production on the PCB’s.

U80.JPG

M60-A SEQ2

The M60-A SEQ2’s are all complete! We are waiting for the ZEIT editions to complete before they’re all sea-freighted to our warehouse for final packing and shipping! That is expected to be this upcoming week.

Animated GIF-downsized_large (6).gif

WAVE Ti / M60-A SEQ2 / M6-C / Caps & more!

WAVE SEQ2 Ti

The Titanium Wave caps have arrived in our warehouse and will be shipping out once packaged. These, we think, are our best keycaps yet - the smoothness of the finish surpasses any we have made before. We’re excited for people to receive these!
We have a limited amount left in stock available to order.

L1030917.JPG

M60-A SEQ2 Starter Kits

As we await the M60-A SEQ2’s to arrive, we’re packaging a lot of the accessories that will be shipping with some orders. The M60’s are due to arrive later this month in our warehouse for order-packing and shipping.

L1030923.JPG

M6-B PCB’s

The M6-B PCB’s have arrived for the M6-C production. Orders of just the PCB will be shipped when packaged. We’re also awaiting the enclosures and GRID keycaps for the M6-C shipments to go out.

L1030919.JPG

Switchpuller XO

A large number of Switchpuller orders have gone out - and we’re looking forward to seeing these to good use! We have a large amount in stock for anyone who wants one.

L1030924.JPG

New packaging and TEAM Caps

The packaging we were waiting on has arrived and we have started to ship the TEAM Caps. If you have ordered a TEAM Cap alongside other in-stock items, it will be going out.

L1030925.JPG

Collaboration Keycaps - MIZU

The MIZU Collaboration keycaps have arrived and are being packaged to be sent to the distributors. We’re really happy with how these turned out and the blue glow!

L1030930.JPG
L1030926.JPG

Merch / M60-A SEQ2 Updates / Misc

RAMA WORKS® CAPS

We have our caps in stock and will be available through our web-store in the next week.

L1030547.JPG

Each cap comes with it’s own dust bag for storage (or for use with anything else)

L1030549.JPG
L1030550.JPG

M60-A SEQ2 Production

All M60-A SEQ2 units have been machined. They are now off to be enamel filled on the back-weight and then packaged - this will take around 2 weeks. They will then be freighted to our warehouse for final packaging, packing and shipment!

Inventory 2 / Trays / Heavy Industry SEQ2

These items will be shipping out in October.

GRID KEYCAPS

We’re adjusting the mould for the GRID keycaps to use a knockout plate for ejection. This will remove the area on the underside of the cap where the ejector pins are located to now be a clean surface. These changes will take some time, but will allow us to deliver a higher quality product! Once we green-light the latest sample, production will move through quickly.

L1030055.JPG

MISC

The Gateron Silent Inks have arrived for the U80-A orders! These will be packed once our new packaging arrives for them.

L1030554.JPG

M60-A SEQ2 PCBs / KOYU Extras / 16th August Launch

M60-A SEQ2 PCBs

L1030232.JPG
L1030228.JPG
L1030231.JPG

The M60-A (Hotswap) PCB’s and M60-Ax (Solderless) PCB’s have arrived in our warehouse and are being packed in preparation for the enclosure arrivals. The M60-A SEQ2 enclosures are in the final stages of production and will be ready in the next month or so for final packaging and shipment! Orders of the individual PCB’s will be sent out this month.

KOYU Extras

The KOYU extra’s will be shipped this week. For those that missed out, the KOYU will be returning in a new revision within 2 months.

16 08 19 17 00 PST

Our latest product will be launching alongside the RAMA WORKS® x MIGHTYKILLERS® Film Canisters. We’re very excited to show what it is!

L1030356.JPG
L1030362.JPG
rw-16-08-19-17-00

KOYU Shipping Timeline / M60-A Production / U80-A Buying Guide / RW LP A GRID SET

KOYU Shipping Timeline

L1000645.JPG

The KOYU’s are en-route to our warehouse and we anticipate them to land at our warehouse in early July, we’ll then be packing and shipping the KOYU’s in batches and anticipate them to be shipped through mid-to-late July.

If you are holding out for an extra unit, please sign-up to the waiting list here:
https://rama.link/koyulist

M60-A SEQ 2 Production

L1000552.JPG

The Aluminium enclosures for the M60-A SEQ2 have all finished machining and are onto polishing and surface treatment now. The Brass & Aluminium backweights are still in machining and we expect them to be completed soon. We anticipate that the M60-A SEQ2 units will be completed by August.

Did you know each M60-A takes 10 hours to machine? This is just the top and bottom enclosure, not including the back piece. It’s then further polished, cleaned and anodised (or PVD coated)!

U80-A Buying Guide

RW-U80-WIDE-HERO-A.1702.jpg

Confused about what to order or what you will need to build a complete RW U80-A keyboard? We’ve created a guide to try and help out and show where you can purchase some of the components to make the keyboard your own! We also have a few other guides on how to adjust and make the typing experience for your keyboard unique.

RW LP A - GRID SET - PRODUCTION

Animated GIF-downsized_large (2).gif

Our first tool samples are set to arrive in the next few days for the GRID keycaps we have created, suited for ortholinear boards. We have also extended the pre-order for the M6-C / Inventory 2 & GRID caps to finish alongside the U80-A pre-order on July 10th, 2019.

KOYU Production / M60-A SEQ2 Production / RW LP Keycaps / U80-A

KOYU Production Updates

L1000606.jpg

All Aluminium variants of the KOYU have been completed and are now going through final inspection and packaging.

L1000640.jpg
L1000648.jpg

KOYU TANK EDITIONS

Raw brass is very susceptible to scratches and resulted in a high-scratch rate during the PVD plating. It’s a challenging process when dealing with a mirror-finish as it’s unforgiving, making the surface untouchable while mounting the fixtures. All units which do not pass are then re-finished and then sent for re-plating, we’re doing this at a rate of several a day and should be complete this week. See below the beautiful mirror-polished, raw brass KOYU.

L1000627.jpg
L1000629.jpg

Here is how the KOYU TANK looks after being PVD plated. It is inconceivably heavy, I hope all that were lucky enough to secure one make some stability upgrades to their desks!

L1000609.jpg
L1000617.jpg

TANK upgrades!

We’ve added an oil coating to the base of the TANK editions. Bead-blasted PVD is incredibly absorbent to any oils, making it a fingerprint magnet. We’ve added an oil finish to the brass base to make it less-porous and not attract fingerprints which results in a much cleaner finish. It also made the colour darker than normal which matches more nicely with the top enclosure.

L1000753.jpg

Extras

We will have extras of the KOYU available around JULY. This will include TANK editions. Time/Date for the extras will be posted to our social media and mailing list: https://rama.link/mail

M60-A Production updates

L1000550.jpg

The M60-A SEQ2’s are well into the machining process, there are a significant number of units to go through with many machining operations. This is the longest process in the production chain.

L1000563.jpg

RW LP Keycaps

We’ve begun production on the mould for our new Low-Profile keycaps. We’ve made these available in 9 different colour options and in a set of 60x1U + 2x2U so that they can be used on various ortholinear boards. They will be moulded from Polycarbonate for its exceptional optical clarity when creating our ICED variation of the cap (PC allows up to 90% of light transmission). The keycap has a polished finish on the outer surfaces for a retro look/feel, and the inside of the cap has a frosted finish to help disperse light when used with LEDs and the ICED cap. The first tool samples should be ready by Mid-June. You can pre-order them now at: https://rama.link/rwlp

RW-M6-C-PRESS-01.1733.jpg
RAMA-LP-GRID-CAP-SET-B.1620.jpg

U80-A

The U80-A will be launching before the end of May. We have already started prototyping and commenced production on parts of the assembly. Our custom fasteners & spacers for the countersunk screws in the plate and MUTE mount have been produced in mass and received in our warehouse. The custom feet have also been produced in mass. The MUTE mount and U80-A enclosure prototype are in production and should be received in JUNE. The prototype PCB’s have also arrived and are being evaluated.

The U80-A will launch on the 31st of May at 8.00 PM (EST) at $420 USD

L1010470.jpg

KOYU / Internal Dampener / M.2 SSD Enclosure / M60-A SEQ1 Giveaway

KOYU

The Rama Works KOYU has finished machining and is now moving to the next stages of production. From here they will be surface treated, Anodised or PVD coated and then carefully packed to their base configurations for packaging. We’re super excited to show the packaging we have created for our latest board! We will also be visiting our manufacturers to complete a QC of the products before they’re freighted to our warehouse for final assembly, further packaging and shipment.

RW-KOYU-ANODISING-A.1623-3.jpg

Internal Dampener / RW Fastener Kits

We’ve received the first off-tool samples of the Internal Dampeners, we have signed off and they have begun production. We anticipate that they’ll be ready to ship by the end of the month or early next. The fastener kits should also be ready to ship around this time frame.

We also have the Internal Dampener and Fastener Kits available to purchase through our website! If you would like us to add it to an existing order, please reply to your order confirmation email.

L1020554.jpg

M.2 SSD Enclosure

We’ve begun tests on the electronics on our USB 3.1 Gen 2 M.2 PCIe Bridge Controller for the Cache Portable SSD. We’ll soon be completing and prototyping the enclosure for this unit for further testing.

Note: Hand-soldered PCB for testing/evaluation.

Note: Hand-soldered PCB for testing/evaluation.

L1020553.jpg

M60-A Giveaway

We’re giving away an M60-A and some other Rama Works products! You can enter through the link below

RAMA-m60-B-naut.1606.jpg

RW KOYU W SERIES OVERVIEW 02

This a video showcasing between no-Internal Weight/Dampener, the Internal Dampener and the Internal Weight in the Rama Works KOYU keyboard (RACE colorway)

Products used:

W01 Internal Weight

https://ramaworks.store/products/w01-a-internal-weight

W02 Internal Dampener

https://ramaworks.store/products/w02-a-internal-dampener

Compatible with the M60-A and KOYU (cannot be used at the same time)

BTS

L1020536.jpg
L1020537.jpg
L1020541.jpg

Internal Dampener & Internal Weight comparison

A filmed comparison

NOTE: We've noticed that it's a little hard to tell between the dampener and weight and will be re-filming with non-silent switches installed.

This a video showcasing between no-Internal Weight/Dampener, the Internal Dampener and the Internal Weight.

Products used:

W01 Internal Weight

https://ramaworks.store/products/w01-a-internal-weight

W02 Internal Dampener

https://ramaworks.store/products/w02-a-internal-dampener

Compatible with the M60-A and KOYU (cannot be used at the same time)

BTS

The sound was filmed using an array of stereo microphones. No post processing (i.e noise reduction) was used.

L1020513.jpg
L1020516.jpg
L1020517.jpg

M60-A SEQ2 / PBT Heavy Industry

M60-A SEQ2 has launched!

To celebrate we created a video.

This is a celebration of the M60-A, inspired by a community of people that have allowed us to be at the center of their workspace. Featured in this video are the new M60 finishes, MILK and HAZE, and the STEALTH EDITIONS of MOON and KURO.

You can check out more information on SEQ2 by following this link: https://rama.works/#/m60a-seq2/

We have a lot of new features and options available with the SEQ2 launch, including the new Internal Dampener and our new signature fixture series. All accessories are compatible with previous and future releases.

We will be producing a video showcasing the differences of sound both with and without the internal dampener within the upcoming week!

L1020411-edit.jpg
RW-M60-A-PRODUCT-RENDERS-SEQ2-2-WIDE-SETS.1575.jpg

The KOYU will also be shipping with our new signature fasteners and will complete the look!

PBT Heavy Industry

PBT Heavy Industry is en-route to our warehouse where we will be shipping them out in the following weeks - we’re excited to see these adorned on some keyboards!

L1020434-edit.jpg

M6-B Shipping / M60-A Extras / SEQ2

M6-B Shipping

All M6-B units have been shipped as of last week and we will have extras available this week!

75D904C5-ACF7-4BE3-A3CB-252C7BDD22A6.jpg
7307A942-9B32-42E7-9942-4627C831DE36.jpg

M60-A Extras

We have a number of units of the M60-A which will be first offered to the waiting list then open to the public shortly after. This is in very small supply.

RAMA-m60-B-laser-02.1506.jpg

SEQ 2

The SEQ2 Wave caps will be available in stock, along side the M6-B and M60-A extras / with the KURO / MOON / SAGE / LAKE / DUSK colourways

RAMA-M6-B-RENDER-02.1509.jpg

M60-A Shipping / KOYU / M6-B / XO Tool

M60-A Now Shipping!

2CB1AD85-8F7B-4A5F-B72A-83922B54025A.jpg

M60-A’s have arrived in our warehouse and we have begun shipping orders! As of today we have packed all Australian orders which will be picked up tomorrow. We will continue packing and shipping orders in batches - owners will receive a shipping notification email when the order is packed and ready! There is a lot to go through, so it will take some time to get through each order - we will however be going through them as quickly as we can.

First batch complete!

First batch complete!

KOYU RACE

The KOYU RACE prototype is in, see some pictures below! We also will have the HAZE prototype in the next few weeks.

C5E40A12-8DC6-4E87-B006-01F29B93BD59.jpg
25951EBF-598A-4263-A0CF-FB9E176CFB61.jpg
E2DAE5CB-0B01-4B8C-97A6-F24F272C5589.jpg
146F4E3D-CDD0-44DD-9100-161CE1DAEAE8.jpg
3F32C215-E587-47AC-A19D-AA337F03CD4C.jpg

Circuits!

The prototype KOYU PCB is in alongside the M6-B production PCB’s.

1BB0C110-1677-4328-A1E4-92DCA24A6C20.jpg
E79C03B8-9036-49A7-A455-F6DBC8DADF04.jpg

XO Switchpuller Tool

A Stainless Steel 304 Switch Puller. Laser-etched. XO detailing. Arriving next month along with our new Rama Wear apparel.

20181102-RW-KOYU-XO-PULLER-SCENE-01.1497.jpg

M60-A INCOMING / PARVUM / MIGHTYKILLERS

M60-A

The M60-A enclosures are landing tomorrow by sea-freight in Melbourne (1st of November)! The container will then be going through customs and then delivered to our warehouse once cleared. Once in our warehouse we will aim to ship out the M60-A keyboards as quickly as possible!

20181031-RW-CONTAINER-TEASER-01.1486.jpg

PARVUM ITX CASE

We’re excited to be showing some of the work for the design we have created for PARVUM SYSTEMS. We will be creating a prototype for them and we will reveal more details to follow once tested. All panels are machined from Aluminium.

20181022-RW-PARVUM-SYSTEM-02.1510.jpg
20181021-RW-PARVUM-SYSTEM-02.1509.jpg

MIGHTYKILLERS

We’ve been wanting to do camera accessories for a long time now, and a great opportunity came up with someone we’ve been following for a while with MIGHTYKILLERS. We have designed for them a series of accessories that we look forward to releasing to the market. To be released: 135 Dual Film Canister, 120 Quad Film Canister, Soft Release & a Cold Shoe Cover.

20181025-RW-MK-RENDER-01.1523-2.jpg
20181030-RW-MK-HOT-SHOE-RENDER-01.1533.jpg

KOYU

One month remains to join the KOYU preorder. In the following weeks we will be showing more of the board and its capabilities/design. Pictured below is the hand-polished mirror finish PVD brass TANK Edition.

20181021-RW-KOYU-TANK-A-RENDER-02-REDSUNS.1495.jpg

BOXR / M60-A / Further Collaborations

BOXR GG

The ‘king’ caps for our friends BOXR GG have been completed and will be shipped to them next week where they will pack and ship them! These have been machined from Brass, hand-polished to a mirror finish and PVD coated to their perfect gold colour. Excited to see these out in the wild!

EC5C88F5-D3A6-4BBA-9D44-809816354C31.jpg
8C50AB81-1719-41AA-9DEA-5BFD658D50B4.jpg
F7BFF9C1-9F73-4A54-BE5A-A4CF9B87D9BD.jpg
1C2734B2-045C-4C1F-8913-073F5CF1983F.jpg
5EA95AE8-EA48-4868-9CFE-65A77A7DB543.jpg

M60-A

The enclosures have officially begun their journey of sea-freight to our Melbourne warehouse. Today we spent programming and packing PCB, and will be again tomorrow. About 3/4th complete - anticipate having most of it completed by tomorrow.

B5FF9415-0FF1-4399-903C-9D777831CA4A.jpg
F4C33373-04AA-438C-B188-F6EECAF2D199.jpg
8D48E4AE-23E4-4F36-A824-1660BB015482.jpg
376685F4-9BC5-4822-AAB3-CFBA5370E44B.jpg

Further Collaborations

GMK Wavez cap with Glow in the Dark enamel infill. More to follow.

RW-CAP-RENDER-01.1473.jpg

M60-A / M6-B / TH 88 Caps / New collabs / Heavy Industry / KOYU

M60-A

All M60-A enclosures have been completed and will be shipped by sea-freight to our Melbourne Warehouse. A little delay has occured due to the Mid-Autumn festival/National holiday but they will be returning in the next few days to promptly pack and prepare the shipping container for shipment. Sea-Freight will take around 2-3 weeks to arrive to our bays in Melbourne, Australia. We will then package and ship in batches of colour and country and aim to complete this over the course of a week with the help of a few hired hands.

A freshly anodised M60-A Dusk

A freshly anodised M60-A Dusk

Meanwhile our team down under (Wilba, Kate & Rama) have been programming, testing and packing the PCB’s whilst we wait for the freight shipment of the M60-A enclosures to arrive. We appreciate the patience of everyone who participated in the pre-orders and we’re excited to see these unboxed and assembled in their own unique combinations.

D34ACB93-E6AA-474F-B357-CEBADBF5A42F.jpg
D949E05B-6F87-4726-B8D5-469754ED5EC8.jpg

M60-A Manufacturing shots

During our visit to our manufacturers we where lucky enough to see some of the M60-A’s undergo the anodising process. Here are some photos of the enclosures receiving their perfect colour. The jigs are all custom made to hold the enclosures in such a way to hide the anode mark. Anodising is all about timing and craftsmanship by extremely skilled workers. Seeing the process in person really makes you appreciate the beauty of chemical reactions much more. First the M60-A goes through a number of cleaning baths to remove any contaminates which may be present on the surface, it then is placed immediately into an ultrasonic bath for a matter of minutes and directly placed into multiple colour tanks where it quickly starts to show its colour.

IMG_0365.JPG
IMG_0366.JPG
IMG_0364.JPG

M6-B

M6-B is well into production. We will be receiving the XO caps from Signature Plastics shortly, the PCB’s will be complete in 2-3 weeks and the enclosures after that. We have ordered many extras to stock on our site for those who missed out.


Pas that, the new XO pins have arrived! This time we laser-cut them out of mirrored stainless steel. These are much tougher and cleaner than the first iteration.

IMG_0363.JPG

TypeHype 88 Edition Keycap

Our limited edition Type Hype caps are starting to arrive to our international customers, very happy with how our first enamel filled keycap came out. A lucky 2 orders will also be receiving an unreleased yellow-enamel filled variant, we hope to see it on a board somewhere!

80539407-0B82-4608-9796-BFF854D9F4CC.jpg
F229256D-655E-4F2B-BB40-52E7E79FFAD6.jpg

New Collabs

Introducing our latest keycap release with the latest GMK set, GMK Chocolatier. We are offering the Blue PVD coated X/O caps in Cherry Profile and a ‘Golden Ticket’ in Gold PVD! These are available through various vendors who are offering the keyset.

RW-KOYU-A-CHOCOLATIER-01.1366.jpg
RW-KOYU-A-CHOCOLATIER-01.1368.jpg

Heavy Industry

We finally launched the Heavy Industry keyset to be paired with our latest offerings, the KOYU and M60 keyboards. Check it out through the link below! It is also suited for other products on the market and can be accented with the yellow or more subtle without.

20180929-RW-KOYU-A-HEAVY-INDUSTRY-01.1378.jpg

https://rama.works/pbt-heavy-industry/

KOYU

New renders have been uploaded to their respective KOYU pages to show the colours of the board in its various colours.

RW-KOYU-9009-KURO.jpg

In other news!

We’re on Apple News! If you own an iOS device subscribe to the “Rama Works” news channel and follow these updates from there also.

M60-A Cables / KOYU Announcement / BOX Royal / Wear

M60-A Cables

IMG_0316.JPG

The new USB A > C cables have arrived, 1.5m long in black braided with metal ends, laser etched.

Three of the six colours have been all anodized as of last week and we anticipate all colours to be finished properly. We will be arriving to our manufacturer next week for a final QC of all the boards before they’re shipped to home base!  Please note that we’ll be away from the office until the 11th of September and slower to reply to all support inquiries, but will do our best to answer as promptly as we can.

IMG_0319.JPG

KOYU Announcement

IMG_0309.JPG

We are incredibly excited to announce our latest offering, the KOYU 65% Keyboard.   It’s an inspiration and evolution of our previous offerings, but entirely new in its own way - we’ve taken all the great aspects of the M60-A and integrated it into the KOYU. 

Integrated 4.5MM plate, In-Switch RGB, hotsockets, fixed layout, optional internal weight (same weight as M60-A / interchangeable). Launching mid-September.

BOX Royal Switches - Re-tooled

IMG_0318.JPG

The replacement BOX Royal Re-tooled switches have arrived and we are promptly having them packed, along with the GMK Stabilisers. 

Wear

img212-7.jpg

U80 SEQ 1 PCB / M6-B Proto / Lumen Proto

U80 Prototype PCB

A lot of people have been waiting for an update on this project, along with us! Finally received in the prototype PCB's today. Will be doing fit testing this week so then we can move quickly with the vendor to getting the product to a production-ready state. Here are some pics of the prototype PCB & Enclosure.

8AFC20E5-89CA-4E5F-A981-AB77D2BE66F0.jpg
7FC19EAE-9E83-482C-A8CD-303FF37B1146.jpg
34CFEE6F-735C-4C85-B7D3-59AAE3EA32F9.jpg

M6-B Proto

LEDs in action! Rainbow mode. Completely programmable via QMK and can be used to indicate a miriad of things.

M6-B-1.gif
03E84289-53F6-4C7E-8A58-CF2D140EAF1C.jpg
M6-B-2.gif

The M6-B is on it's final week for pre-order, get one now before it's too late:

405A3D5D-0512-43A3-8511-A2044E764005.jpg

Lumen (Utility) Light Prototype

A few weeks ago, we teased a concept image of a product we are working on without revealing what it is. The Lumen is an RGBW utility light controllable via HSV (Hue, Saturation, Value/Brightness), the interface consists of two dials which can be clicked in to control different parameters, Hue / Saturation, Hue / Brightness, Pulse Rate / Speed etc. 

A74B5895-8B93-48D0-A8A2-1F8DBAB9C1F5 (1).jpg

Today Wilba (our Hardware Engineer) brought over the prototype test-board to play with and we are now confident we can miniaturize it and create a neat product from it.

E8CD6D9D-F4ED-4105-997E-120CC9DF0812.jpg
 

A lot of people have noticed the deskmat we have in the background of a lot of these images, we have stock arriving at our warehouses in the following weeks, expect something soon!

It's named the Canvas and it's perfectly ratio'd to compliment 60% sized keyboards.