RW KOYU W SERIES OVERVIEW 02

This a video showcasing between no-Internal Weight/Dampener, the Internal Dampener and the Internal Weight in the Rama Works KOYU keyboard (RACE colorway)

Products used:

W01 Internal Weight

https://ramaworks.store/products/w01-a-internal-weight

W02 Internal Dampener

https://ramaworks.store/products/w02-a-internal-dampener

Compatible with the M60-A and KOYU (cannot be used at the same time)

BTS

L1020536.jpg
L1020537.jpg
L1020541.jpg

Internal Dampener & Internal Weight comparison

A filmed comparison

NOTE: We've noticed that it's a little hard to tell between the dampener and weight and will be re-filming with non-silent switches installed.

This a video showcasing between no-Internal Weight/Dampener, the Internal Dampener and the Internal Weight.

Products used:

W01 Internal Weight

https://ramaworks.store/products/w01-a-internal-weight

W02 Internal Dampener

https://ramaworks.store/products/w02-a-internal-dampener

Compatible with the M60-A and KOYU (cannot be used at the same time)

BTS

The sound was filmed using an array of stereo microphones. No post processing (i.e noise reduction) was used.

L1020513.jpg
L1020516.jpg
L1020517.jpg

M60-A SEQ2 / PBT Heavy Industry

M60-A SEQ2 has launched!

To celebrate we created a video.

This is a celebration of the M60-A, inspired by a community of people that have allowed us to be at the center of their workspace. Featured in this video are the new M60 finishes, MILK and HAZE, and the STEALTH EDITIONS of MOON and KURO.

You can check out more information on SEQ2 by following this link: https://rama.works/#/m60a-seq2/

We have a lot of new features and options available with the SEQ2 launch, including the new Internal Dampener and our new signature fixture series. All accessories are compatible with previous and future releases.

We will be producing a video showcasing the differences of sound both with and without the internal dampener within the upcoming week!

L1020411-edit.jpg
RW-M60-A-PRODUCT-RENDERS-SEQ2-2-WIDE-SETS.1575.jpg

The KOYU will also be shipping with our new signature fasteners and will complete the look!

PBT Heavy Industry

PBT Heavy Industry is en-route to our warehouse where we will be shipping them out in the following weeks - we’re excited to see these adorned on some keyboards!

L1020434-edit.jpg

M60-A Shipping / KOYU / M6-B / XO Tool

M60-A Now Shipping!

2CB1AD85-8F7B-4A5F-B72A-83922B54025A.jpg

M60-A’s have arrived in our warehouse and we have begun shipping orders! As of today we have packed all Australian orders which will be picked up tomorrow. We will continue packing and shipping orders in batches - owners will receive a shipping notification email when the order is packed and ready! There is a lot to go through, so it will take some time to get through each order - we will however be going through them as quickly as we can.

First batch complete!

First batch complete!

KOYU RACE

The KOYU RACE prototype is in, see some pictures below! We also will have the HAZE prototype in the next few weeks.

C5E40A12-8DC6-4E87-B006-01F29B93BD59.jpg
25951EBF-598A-4263-A0CF-FB9E176CFB61.jpg
E2DAE5CB-0B01-4B8C-97A6-F24F272C5589.jpg
146F4E3D-CDD0-44DD-9100-161CE1DAEAE8.jpg
3F32C215-E587-47AC-A19D-AA337F03CD4C.jpg

Circuits!

The prototype KOYU PCB is in alongside the M6-B production PCB’s.

1BB0C110-1677-4328-A1E4-92DCA24A6C20.jpg
E79C03B8-9036-49A7-A455-F6DBC8DADF04.jpg

XO Switchpuller Tool

A Stainless Steel 304 Switch Puller. Laser-etched. XO detailing. Arriving next month along with our new Rama Wear apparel.

20181102-RW-KOYU-XO-PULLER-SCENE-01.1497.jpg

M60-A INCOMING / PARVUM / MIGHTYKILLERS

M60-A

The M60-A enclosures are landing tomorrow by sea-freight in Melbourne (1st of November)! The container will then be going through customs and then delivered to our warehouse once cleared. Once in our warehouse we will aim to ship out the M60-A keyboards as quickly as possible!

20181031-RW-CONTAINER-TEASER-01.1486.jpg

PARVUM ITX CASE

We’re excited to be showing some of the work for the design we have created for PARVUM SYSTEMS. We will be creating a prototype for them and we will reveal more details to follow once tested. All panels are machined from Aluminium.

20181022-RW-PARVUM-SYSTEM-02.1510.jpg
20181021-RW-PARVUM-SYSTEM-02.1509.jpg

MIGHTYKILLERS

We’ve been wanting to do camera accessories for a long time now, and a great opportunity came up with someone we’ve been following for a while with MIGHTYKILLERS. We have designed for them a series of accessories that we look forward to releasing to the market. To be released: 135 Dual Film Canister, 120 Quad Film Canister, Soft Release & a Cold Shoe Cover.

20181025-RW-MK-RENDER-01.1523-2.jpg
20181030-RW-MK-HOT-SHOE-RENDER-01.1533.jpg

KOYU

One month remains to join the KOYU preorder. In the following weeks we will be showing more of the board and its capabilities/design. Pictured below is the hand-polished mirror finish PVD brass TANK Edition.

20181021-RW-KOYU-TANK-A-RENDER-02-REDSUNS.1495.jpg

M60-A / M6-B / TH 88 Caps / New collabs / Heavy Industry / KOYU

M60-A

All M60-A enclosures have been completed and will be shipped by sea-freight to our Melbourne Warehouse. A little delay has occured due to the Mid-Autumn festival/National holiday but they will be returning in the next few days to promptly pack and prepare the shipping container for shipment. Sea-Freight will take around 2-3 weeks to arrive to our bays in Melbourne, Australia. We will then package and ship in batches of colour and country and aim to complete this over the course of a week with the help of a few hired hands.

A freshly anodised M60-A Dusk

A freshly anodised M60-A Dusk

Meanwhile our team down under (Wilba, Kate & Rama) have been programming, testing and packing the PCB’s whilst we wait for the freight shipment of the M60-A enclosures to arrive. We appreciate the patience of everyone who participated in the pre-orders and we’re excited to see these unboxed and assembled in their own unique combinations.

D34ACB93-E6AA-474F-B357-CEBADBF5A42F.jpg
D949E05B-6F87-4726-B8D5-469754ED5EC8.jpg

M60-A Manufacturing shots

During our visit to our manufacturers we where lucky enough to see some of the M60-A’s undergo the anodising process. Here are some photos of the enclosures receiving their perfect colour. The jigs are all custom made to hold the enclosures in such a way to hide the anode mark. Anodising is all about timing and craftsmanship by extremely skilled workers. Seeing the process in person really makes you appreciate the beauty of chemical reactions much more. First the M60-A goes through a number of cleaning baths to remove any contaminates which may be present on the surface, it then is placed immediately into an ultrasonic bath for a matter of minutes and directly placed into multiple colour tanks where it quickly starts to show its colour.

IMG_0365.JPG
IMG_0366.JPG
IMG_0364.JPG

M6-B

M6-B is well into production. We will be receiving the XO caps from Signature Plastics shortly, the PCB’s will be complete in 2-3 weeks and the enclosures after that. We have ordered many extras to stock on our site for those who missed out.


Pas that, the new XO pins have arrived! This time we laser-cut them out of mirrored stainless steel. These are much tougher and cleaner than the first iteration.

IMG_0363.JPG

TypeHype 88 Edition Keycap

Our limited edition Type Hype caps are starting to arrive to our international customers, very happy with how our first enamel filled keycap came out. A lucky 2 orders will also be receiving an unreleased yellow-enamel filled variant, we hope to see it on a board somewhere!

80539407-0B82-4608-9796-BFF854D9F4CC.jpg
F229256D-655E-4F2B-BB40-52E7E79FFAD6.jpg

New Collabs

Introducing our latest keycap release with the latest GMK set, GMK Chocolatier. We are offering the Blue PVD coated X/O caps in Cherry Profile and a ‘Golden Ticket’ in Gold PVD! These are available through various vendors who are offering the keyset.

RW-KOYU-A-CHOCOLATIER-01.1366.jpg
RW-KOYU-A-CHOCOLATIER-01.1368.jpg

Heavy Industry

We finally launched the Heavy Industry keyset to be paired with our latest offerings, the KOYU and M60 keyboards. Check it out through the link below! It is also suited for other products on the market and can be accented with the yellow or more subtle without.

20180929-RW-KOYU-A-HEAVY-INDUSTRY-01.1378.jpg

https://rama.works/pbt-heavy-industry/

KOYU

New renders have been uploaded to their respective KOYU pages to show the colours of the board in its various colours.

RW-KOYU-9009-KURO.jpg

In other news!

We’re on Apple News! If you own an iOS device subscribe to the “Rama Works” news channel and follow these updates from there also.

M60-A Cables / KOYU Announcement / BOX Royal / Wear

M60-A Cables

IMG_0316.JPG

The new USB A > C cables have arrived, 1.5m long in black braided with metal ends, laser etched.

Three of the six colours have been all anodized as of last week and we anticipate all colours to be finished properly. We will be arriving to our manufacturer next week for a final QC of all the boards before they’re shipped to home base!  Please note that we’ll be away from the office until the 11th of September and slower to reply to all support inquiries, but will do our best to answer as promptly as we can.

IMG_0319.JPG

KOYU Announcement

IMG_0309.JPG

We are incredibly excited to announce our latest offering, the KOYU 65% Keyboard.   It’s an inspiration and evolution of our previous offerings, but entirely new in its own way - we’ve taken all the great aspects of the M60-A and integrated it into the KOYU. 

Integrated 4.5MM plate, In-Switch RGB, hotsockets, fixed layout, optional internal weight (same weight as M60-A / interchangeable). Launching mid-September.

BOX Royal Switches - Re-tooled

IMG_0318.JPG

The replacement BOX Royal Re-tooled switches have arrived and we are promptly having them packed, along with the GMK Stabilisers. 

Wear

img212-7.jpg